2nd Gen. Dodge Ram - No Drivetrain Discussion for all Dodge Rams from 1994 through 2002. Please, no engine or drivetrain discussion.

Seat heaters

Thread Tools
 
Search this Thread
 
Old Jan 21, 2013 | 05:22 PM
  #1  
TOM R's Avatar
Thread Starter
Registered User
 
Joined: Feb 2008
Posts: 493
Likes: 1
From: Va. and n.j.
Seat heaters

tired of a cold butt on this dam leather is there a aftermarket seat heater I can get to plug into the factory harness, obviously after changing the plug buth my seat heater elements are bad we tried to fix the drivers when it was recovered with no luck
Reply
Old Jan 21, 2013 | 05:51 PM
  #2  
Redlinear's Avatar
Registered User
 
Joined: Apr 2006
Posts: 193
Likes: 0
I've been trying to train the dog to sleep in the driver seat at night...to no avail.
Reply
Old Jan 21, 2013 | 09:10 PM
  #3  
SIXSLUG's Avatar
Registered User
15 Year Member
Liked
Loved
Community Favorite
 
Joined: May 2006
Posts: 5,614
Likes: 167
From: Pacific NW, B'ham, Kalispell MT
If redlinear won't send you a trained dog, check genosgarage for parts....
Reply
Old Jan 22, 2013 | 11:38 PM
  #4  
Ramitt's Avatar
Registered User
 
Joined: Nov 2012
Posts: 36
Likes: 0
From: Altoona, PA
You can get them at geno's

http://www.genosgarage.com/ROSTRA-DU...STRA_250_1870/
Reply
Old Jan 23, 2013 | 08:08 AM
  #5  
TOM R's Avatar
Thread Starter
Registered User
 
Joined: Feb 2008
Posts: 493
Likes: 1
From: Va. and n.j.
thanks guys, the ones in the link will work on my factory wiring?
Reply
Old Jan 23, 2013 | 10:15 AM
  #6  
SIXSLUG's Avatar
Registered User
15 Year Member
Liked
Loved
Community Favorite
 
Joined: May 2006
Posts: 5,614
Likes: 167
From: Pacific NW, B'ham, Kalispell MT
I believe they are an exact replacement part, with proper connectors, but they should be able to tell you...
Reply
Old Jan 24, 2013 | 05:43 PM
  #7  
TopperHarley's Avatar
Registered User
 
Joined: Jan 2008
Posts: 18
Likes: 0
I'm in the same situation. Would like to find elements to plug into the factory harness.
Reply
Old Feb 2, 2013 | 11:55 AM
  #8  
WILDTHING's Avatar
Registered User
 
Joined: Jan 2013
Posts: 1
Likes: 0
From: northern alberta, canada
Ive got only the high setting on the drivers side seat of my 2005 3500, passenger side still works fine, element?
Reply
Old Feb 2, 2013 | 09:24 PM
  #9  
TOM R's Avatar
Thread Starter
Registered User
 
Joined: Feb 2008
Posts: 493
Likes: 1
From: Va. and n.j.
OK I have a confusing problem, i start the truck and the heaters both come on, then if I shut them off they come back on sometimes blinking sometimes not, sometimes I cannot turn them off, sometimes they will not come on

I have heat on the drivers seat for the first time since buying the truck
I did not replace the heat elements

is the controler under the seat bad?
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
durasmack
3rd Generation Ram - Non Drivetrain - All Years
2
Jun 14, 2005 10:31 AM
eastmentCTD600
3rd Generation Ram - Non Drivetrain - All Years
4
Jan 13, 2005 12:15 PM
PROSOUTH
3rd Generation Ram - Non Drivetrain - All Years
6
Dec 26, 2004 10:05 PM
2001 Dodge CTD
2nd Gen. Dodge Ram - No Drivetrain
2
Jan 27, 2004 08:11 AM




All times are GMT -5. The time now is 05:16 AM.