Hi folks,
A side window flare on my truck has peeled off at the upper end. It is a Bugflector thing and was held in place by double sided sticky tape. The tape is stuck like mad to the door but the flare peeled off. I need to get some tape, what brand worked good for you and where did you get it?
Thanks!
-P

 

3M makes some pretty good doublesided tape.

 

Availabe at any auto parts house.

3M double sided foam body trim tape (or something like that)

One of my windvisors flew off in a carwash, taped back on and held till I sold that truck.


phox

 

Thanks! Will pick some up tomorrow. Tired of flutter in the wind.
-P

 

Paul, you probably already know this but use some alcohol on both surfaces before applying the tape.

 

Thank Dr. Evil, I will remember that. What a waste of alcohol though
-P

 

Apply alchohol liberally to all surfaces...including the installer.

 

3M VHB tape. When i was in the aluminum trailer industry we used a lot of it instead of rivets to attach the outer side sheets and roof skin. Can't stress enough the importance of surface prep, lightly sand/rough up any painted surface and clean with alcohol.