2nd Gen. Dodge Ram - No Drivetrain Discussion for all Dodge Rams from 1994 through 2002. Please, no engine or drivetrain discussion.

Missing items on end of production run

Thread Tools
 
Search this Thread
 
Old Dec 8, 2003 | 07:56 PM
  #1  
scook6's Avatar
Thread Starter
Registered User
 
Joined: Nov 2003
Posts: 144
Likes: 0
From: Kenton, OH
Missing items on end of production run

Hi I noticed on one of the 3rd generation boards someone touched upon parts that were left out on the last of the 2nd generation trucks. This fellow said only the very last trucks produced were missing things, but mine was made in 10/01 and there seems to be things that are missing that were on my 99 and 95. Some of the things that seemed to be missing are: rear inner fender liners, right inside upper grab handle, hood insulation, rear cup holder, black bottom tailgate moulding just to name a few. I had the inner fenders put on mine as they were available from the parts dept. At the time the rest of the stuff was on national backorder. The grabhandle and hood insulation are on my list to get. Does anyone know of anything else that was "left off" these trucks in the last year?





2002 2500 Quad Cab 4X4 Atlantic Blue and Silver
Reply
Old Dec 8, 2003 | 08:06 PM
  #2  
phox_mulder's Avatar
Administrator
 
Joined: May 2002
Posts: 6,522
Likes: 4
From: Sandy, Utah
Re:Missing items on end of production run

There used to be a lighted key "halo" on the ignition switch.

The side body moulding used to go from grill to tailgate.

I think you covered everything else that mysteriously disapeared over the years.


phox
Reply
Old Dec 9, 2003 | 03:13 AM
  #3  
RATTLINRAM's Avatar
Administrator
 
Joined: Aug 2001
Posts: 3,529
Likes: 2
From: Disputanta, Virginia
Re:Missing items on end of production run

Didn't they stop putting the dimmable-lighted -vanity mirrors on the sunvisors too?
Reply
Old Dec 9, 2003 | 08:29 AM
  #4  
Marine's Avatar
Registered User
Veteran: Marine Corp
20 Year Member
Liked
Loved
 
Joined: Aug 2001
Posts: 2,058
Likes: 6
From: Canuckistan
Re:Missing items on end of production run

I would really like the upper passenger grab handle. Part number? and is the support still under the plastic where it mounts?

Mike
Reply
Old Dec 9, 2003 | 09:10 AM
  #5  
1ST CUMNZ's Avatar
Registered User
 
Joined: Sep 2002
Posts: 147
Likes: 0
Re:Missing items on end of production run

DOES ANYONE HAVE A FAIRLY ACCURATE LIST ON WHAT WAS MISSING.I'AM THINK OF BUYING A USED 01 OR 02.WOULD HELP WHEN IT CAME TO BUYING ONE OD THESE BEASTS
Reply
Old Dec 9, 2003 | 10:04 AM
  #6  
Bearfoot2's Avatar
Registered User
 
Joined: Jan 2003
Posts: 314
Likes: 0
From: S W Idaho
Re:Missing items on end of production run

Other missing items: Under hood trouble light. Glove box light.
Reply
Old Dec 9, 2003 | 12:21 PM
  #7  
BigBlue's Avatar
Banned
 
Joined: Feb 2002
Posts: 0
Likes: 0
Re:Missing items on end of production run

Mine came with everything except the upper passenger Oh Poop bar, vanity mirror lights (cause I care so much :) and plastic tailgate moulding (glad it didn't come with that). Mine's an early 01.
Reply
Old Dec 9, 2003 | 04:25 PM
  #8  
jfpointer's Avatar
Registered User
 
Joined: Jun 2002
Posts: 811
Likes: 1
From: Kansas City & Maysville, MO
Re:Missing items on end of production run

[quote author=Bearfoot2 link=board=5;threadid=23475;start=0#msg220777 date=1070985891]
Other missing items: Under hood trouble light. Glove box light.
[/quote]

My '02 (built in March or April, I think) has the underhood light. I never really noticed whether it has a glove box light or not.
Reply
Old Dec 9, 2003 | 04:45 PM
  #9  
Shovelhead's Avatar
Administrator / Scooter Bum
 
Joined: Sep 2002
Posts: 9,086
Likes: 49
From: Central VA
Re:Missing items on end of production run

I think the '99 model year had the most "Standard" toys.
Each year after that a couple of more goodies disappeared.
Reply
Old Dec 9, 2003 | 10:47 PM
  #10  
jrs_dodge_diesel's Avatar
Administrator
 
Joined: Nov 2003
Posts: 4,569
Likes: 40
From: League City, TX
Re:Missing items on end of production run

My 2001 has the following :

Ignition switch "halo"
Underhood light
Glovebox light
"oh poop" handle on passenger side A pillar

The only thing I have seen that I don't have is the lights on the backside of the sunvisor with the mirrors.
Reply
Old Dec 10, 2003 | 12:32 PM
  #11  
dodgeram's Avatar
Registered User
 
Joined: Nov 2002
Posts: 427
Likes: 0
From: Gillam manitoba Canada
Re:Missing items on end of production run

[quote author=jrs_dodge_diesel link=board=5;threadid=23475;start=0#msg221194 date=1071031671]
My 2001 has the following :

Ignition switch "halo"
Underhood light
Glovebox light
"oh poop" handle on passenger side A pillar

The only thing I have seen that I don't have is the lights on the backside of the sunvisor with the mirrors.
[/quote]

those items are part of the "light group" option ....... it's about 30 buck ........... if the dealer doesn't check it you don't get those items

Reply
Old Dec 10, 2003 | 01:11 PM
  #12  
PHX_ATC's Avatar
Registered User
 
Joined: Sep 2001
Posts: 283
Likes: 0
From: Mesa, AZ
Re:Missing items on end of production run

Somebody took all the rear seat cupholders!!!

That, and they left we the world's worst front seat cupholders.

I shopped at Geno's!
Reply
Old Dec 10, 2003 | 06:16 PM
  #13  
Marine's Avatar
Registered User
Veteran: Marine Corp
20 Year Member
Liked
Loved
 
Joined: Aug 2001
Posts: 2,058
Likes: 6
From: Canuckistan
Re:Missing items on end of production run

[quote author=dodgeram link=board=5;threadid=23475;start=0#msg221472 date=1071081168]
[quote author=jrs_dodge_diesel link=board=5;threadid=23475;start=0#msg221194 date=1071031671]
My 2001 has the following :

Ignition switch "halo"
Underhood light
Glovebox light
"oh poop" handle on passenger side A pillar

The only thing I have seen that I don't have is the lights on the backside of the sunvisor with the mirrors.
[/quote]

those items are part of the "light group" option ....... it's about 30 buck ........... if the dealer doesn't check it you don't get those items


[/quote]
I have the light group, but it does not include the ignition halo.
Mike
Reply
Old Dec 10, 2003 | 07:08 PM
  #14  
JKlender's Avatar
Registered User
 
Joined: Nov 2002
Posts: 35
Likes: 0
From: Clarkston, Michigan
Re:Missing items on end of production run

Another fairly important thing they started doing was deleting the front axle vacume disconnect. My 2002 has it, but some of the last in the run did not.
Reply
Old Dec 11, 2003 | 01:56 AM
  #15  
magnum's Avatar
Registered User
 
Joined: Nov 2003
Posts: 182
Likes: 0
From: Plymouth, MN
Re:Missing items on end of production run

Mine came missing a hood insulator. Got a new one from the dealer, then had to furnish my own clips.....bummer.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
jmccart
3rd Gen High Performance and Accessories (5.9L Only)
10
Apr 2, 2009 08:44 PM
cumminsdriver635
General Diesel Discussion
23
Apr 9, 2004 08:09 PM
jthorpe
Site News
4
Dec 31, 2003 07:48 PM
Jack Thorpe
3rd Generation Ram - Non Drivetrain - All Years
11
Nov 6, 2003 01:25 PM
UTAH
3rd Generation Ram - Non Drivetrain - All Years
8
Nov 22, 2002 11:58 AM




All times are GMT -5. The time now is 01:40 AM.