Hydro Boost flare nut / line wrench size
Thread Starter
Registered User
Joined: Jun 2010
Posts: 100
Likes: 3
Hydro Boost flare nut / line wrench size
He man , what size line wrench fits the high press power steering line attached to the hydro boost? There's two
My standard SAE line wrench crows feet dont fit. 11/16 was the closets but too small..... Dont have metric but 17mm open end wrench to small 19mm to large. must be a 18mm ,
Lucky I had a old modified 11/16 box wrench (cut) that fit snug on the line bolt that I used
Who's got a 18mm open end wrench that can go out to your 2nd gen truck and see if that's it?
Im going to go buy a new set of metric combo wrenches that include a 18 MM
My standard SAE line wrench crows feet dont fit. 11/16 was the closets but too small..... Dont have metric but 17mm open end wrench to small 19mm to large. must be a 18mm ,
Lucky I had a old modified 11/16 box wrench (cut) that fit snug on the line bolt that I used
Who's got a 18mm open end wrench that can go out to your 2nd gen truck and see if that's it?
Im going to go buy a new set of metric combo wrenches that include a 18 MM
Wow !
Registered User
Joined: Apr 2009
Posts: 184
Likes: 29
From: Banning, ca same house 73yrs
Thread
Thread Starter
Forum
Replies
Last Post
Clane
3rd Generation Ram - Non Drivetrain - All Years
5
Jun 2, 2012 03:31 PM
1-5-3-6-2-4
3rd Generation Ram - Non Drivetrain - All Years
2
Jan 23, 2007 03:12 PM