help please-lukes link install??
Registered User
Joined: Dec 2003
Posts: 14,672
Likes: 9
From: Montana
I installed several Luke's with no problem till I got to one where the stock ball was worn out. Too much horizontal movement. New ball end fixed it right up. Hard to tell how worn they are by just looking, you need a new ball to caliper off of to see that only a few thousandths is all it takes to cause slop.
Registered User
Joined: Dec 2003
Posts: 1,032
Likes: 1
From: Where water boils at 193.4°
Originally posted by infidel
I installed several Luke's with no problem till I got to one where the stock ball was worn out. Too much horizontal movement. New ball end fixed it right up. Hard to tell how worn they are by just looking, you need a new ball to caliper off of to see that only a few thousandths is all it takes to cause slop.
I installed several Luke's with no problem till I got to one where the stock ball was worn out. Too much horizontal movement. New ball end fixed it right up. Hard to tell how worn they are by just looking, you need a new ball to caliper off of to see that only a few thousandths is all it takes to cause slop.
Thread
Thread Starter
Forum
Replies
Last Post
jriggs_18
Performance and Accessories 2nd gen only
2
Mar 22, 2008 10:29 PM
matt1969
Performance and Accessories 2nd gen only
6
Jun 21, 2007 09:06 PM
