2nd Gen. Dodge Ram - No Drivetrain Discussion for all Dodge Rams from 1994 through 2002. Please, no engine or drivetrain discussion.

Has anyone removed the fuel separator lever assembly?

Old Dec 29, 2007 | 09:01 AM
  #1  
azmusclecar's Avatar
Thread Starter
Registered User
 
Joined: Aug 2007
Posts: 45
Likes: 0
From: sahuarita arizona
Has anyone removed the water/fuel separator lever assembly?

Just looking for someone who may have removed and/or cleaned and/or replaced the unit. I'd like to know what's in Pandora's box before I go opening it. Thanks.
Reply
Old Dec 29, 2007 | 09:35 AM
  #2  
John Faughn's Avatar
Registered User
20 Year Member
 
Joined: Sep 2004
Posts: 2,888
Likes: 1
From: St Paul , MN.
More info to us may provide more for you , fill in sig = you truck details .
Terms may be off , or different than what I use , lever *** ?
My truck 94 , makes me think of lift pump , but that is separate from the fuel filter , which has a water drain valve /sensor on bottom .
Also I have the fuel prefilter/heater .
Reply
Old Dec 29, 2007 | 09:53 AM
  #3  
crane 1's Avatar
Registered User
 
Joined: Aug 2006
Posts: 25
Likes: 0
there's a spring and plunger inside it attached to the lever...pretty simple. A little wd40 or oil will keep it from seizing up.
Reply
Old Dec 29, 2007 | 10:49 AM
  #4  
azmusclecar's Avatar
Thread Starter
Registered User
 
Joined: Aug 2007
Posts: 45
Likes: 0
From: sahuarita arizona
Originally Posted by John Faughn
More info to us may provide more for you , fill in sig = you truck details .
Terms may be off , or different than what I use , lever *** ?
My truck 94 , makes me think of lift pump , but that is separate from the fuel filter , which has a water drain valve /sensor on bottom .
Also I have the fuel prefilter/heater .
Sorry 'bout dat..........2001 Dodge Ram 5.9 CTD.........it's the lever beside the fuel filter with a drain hose on it. Hope this helps.
Reply
Old Jan 3, 2008 | 05:42 PM
  #5  
azmusclecar's Avatar
Thread Starter
Registered User
 
Joined: Aug 2007
Posts: 45
Likes: 0
From: sahuarita arizona
Just found out the part number for this is 3923831S from the Cummins Dealer.........the rebuild kit was $8.00 but they changed it and now the kit cost $17.00 Just posted this here for future searchers, save a little time if you have the part number.
Reply
Old Sep 9, 2008 | 05:22 PM
  #6  
82shovel's Avatar
Registered User
 
Joined: Apr 2006
Posts: 58
Likes: 0
From: Tucson, AZ
AZ, I sent a PM... where did you go for that part? I'm in Tucson.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
MikeThomas
1st Gen. Ram - All Topics
6
May 21, 2007 12:12 AM
Jeeptug
3rd Gen Engine and Drivetrain -> 2003-2007
5
Apr 11, 2007 11:49 PM
LooseBoltsRob
3rd Gen High Performance and Accessories (5.9L Only)
9
Jan 17, 2007 07:42 PM
Dodgezilla
3rd Gen Engine and Drivetrain -> 2003-2007
5
Jul 9, 2004 06:17 PM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 10:31 AM.