2nd Gen. Dodge Ram - No Drivetrain Discussion for all Dodge Rams from 1994 through 2002. Please, no engine or drivetrain discussion.

Air Induction

Thread Tools
 
Search this Thread
 
Old Dec 22, 2002 | 06:15 PM
  #1  
ozzie's Avatar
Thread Starter
Registered User
 
Joined: Nov 2002
Posts: 59
Likes: 0
From: Forest Lake,Mn.
Air Induction

I'm interested in installing a tornado air induction unit on my 2002 ctd. Has anyone tried this unit?? Can I use it with a k&n aftermarket filter?
Reply
Old Dec 22, 2002 | 06:27 PM
  #2  
Alan_Reagan's Avatar
Registered User
 
Joined: Aug 2001
Posts: 269
Likes: 0
From: Kathleen, GA
Re:Air Induction

I'm curious as to where this thing will go. Before or after the intercooler. It shouldn't matter about the K&N because to have any chance of being effective, it's gonna have to go in after the intercooler in my opinion.
Reply
Old Dec 22, 2002 | 06:37 PM
  #3  
ozzie's Avatar
Thread Starter
Registered User
 
Joined: Nov 2002
Posts: 59
Likes: 0
From: Forest Lake,Mn.
Re:Air Induction

I think it's suppose to go in the hose that leads to the air box. It looks to be aprox 6-8 inches in diameter.
Reply
Old Dec 22, 2002 | 07:03 PM
  #4  
Ruralmedic's Avatar
Registered User
 
Joined: Nov 2002
Posts: 367
Likes: 0
From: NE Wisconsin
Re:Air Induction

I don't think it would be of any benefit on a turbocharged diesel. My other vehicle is GM 350 gasser naturally aspirated with throttle body fuel injection. I installed the "tornado" over a year ago, and quite franky haven't noticed any performance or mileage gains with it. $80 out the window as far as I'm concerned.
Reply
Old Dec 22, 2002 | 10:07 PM
  #5  
TX Ram's Avatar
Registered User
 
Joined: Apr 2002
Posts: 137
Likes: 0
Re:Air Induction

they are supposed to install in the intake hose, but quite frankly i think they are a waste of money and are more of a restriction than an improvement. JMO
Reply
Old Dec 23, 2002 | 01:58 AM
  #6  
Tom Bolitho's Avatar
Registered User
 
Joined: Apr 2002
Posts: 154
Likes: 0
From: SoCal
Re:Air Induction

I don't have any faith in it, but if you do install it, puy as close to the intake manifold as possible. If it is before the intercooler any swirl will be straightened going through it.
Reply
Old Dec 23, 2002 | 06:34 AM
  #7  
Alan_Reagan's Avatar
Registered User
 
Joined: Aug 2001
Posts: 269
Likes: 0
From: Kathleen, GA
Re:Air Induction

Isn't the intake a 4" line?
Reply
Old Dec 23, 2002 | 11:15 AM
  #8  
Lil Dog's Avatar
Chapter President
 
Joined: Feb 2002
Posts: 6,102
Likes: 2
From: Red Deer, Alberta Canada
Re:Air Induction

&gt; I can't believe this thing is still on the market.... <br><br> IMO..... Don't Buy It!!!<br><br>This is good ol snake oil in steel form.. The Cummins engine does its own swirl action right at the intake valve(s) to aid in combustion. Anything this product has to offer is non-existant in a diesel, especially turbo diesel application. The theory of better fuel atomization (if any IMHO) is not applicable to the Diesel process.<br><br>Spend your money on a good air filter or alternate induction system and leave the hoses tight and unobstructed from the turbo to the engine.<br><br>J-eh
Reply
Old Dec 23, 2002 | 12:10 PM
  #9  
Dieseldude4x4's Avatar
Administrator
 
Joined: Sep 2002
Posts: 3,400
Likes: 1
From: Claremont, Virginia
Re:Air Induction

Take that money and buy a few good beers and stay at the house to drink them or donate it to Jack for the site. Either one will give you the same amount of performance improvement as installing the turbo tiger or whatever they are calling it these days.
Reply
Old Dec 23, 2002 | 07:10 PM
  #10  
ozzie's Avatar
Thread Starter
Registered User
 
Joined: Nov 2002
Posts: 59
Likes: 0
From: Forest Lake,Mn.
Re:Air Induction

I wish I had known about this site when I had my '92. The wealth of info from you guys is enormous and very much appreciated. Hope everyone has a very safe and happy holiday!!!!!!!!!! ;D
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
AK RAM
3rd Gen High Performance and Accessories (5.9L Only)
38
Feb 17, 2004 04:05 PM
Hairy1
3rd Gen High Performance and Accessories (5.9L Only)
5
Dec 18, 2003 10:28 AM
Scotty
Performance and Accessories 2nd gen only
10
Apr 26, 2003 12:17 AM
HeberRam
Performance and Accessories 2nd gen only
25
Apr 23, 2003 03:06 PM
jimrob
1st Gen. Ram - All Topics
3
Apr 18, 2003 06:56 PM




All times are GMT -5. The time now is 11:37 AM.