Mark this thread as Unsold
Engine & Drivetrain Wanted: ECM
#1
Registered User
Thread Starter
Wanted: ECM
Anyone have an '01 or '02 6sp HO truck in the pasture? I'm in need of an ECM
My truck has gone into limp mode and my mechanic has checked everything it thinks is wrong. (IAT sensor, MAP sensor and Bus.)
He's 99% certain it's the ECM. Unfortunately, that ECM is unique to those years and the HO 6 speed manual.
Thanks! Randy.
My truck has gone into limp mode and my mechanic has checked everything it thinks is wrong. (IAT sensor, MAP sensor and Bus.)
He's 99% certain it's the ECM. Unfortunately, that ECM is unique to those years and the HO 6 speed manual.
Thanks! Randy.
#2
Registered User
Join Date: Dec 2010
Location: Land of the Toxic Avenger
Posts: 6,770
Received 1,637 Likes
on
1,112 Posts
Oliver?
#3
Registered User
'01-'02 HO 6 speed ECM, you ask?
I am pretty sure I have one along with the complete engine wire harness on my shop shelf.
PM me if you like and I will go check on it, when I go out to stoke up the fire with the dogs in a few minutes.
I am pretty sure I have one along with the complete engine wire harness on my shop shelf.
PM me if you like and I will go check on it, when I go out to stoke up the fire with the dogs in a few minutes.
#5
Registered User
Join Date: Dec 2010
Location: Land of the Toxic Avenger
Posts: 6,770
Received 1,637 Likes
on
1,112 Posts
Why not send it out to be repaired? I can't imagine it's not repairable, if it wasn't in a fire, or accident.
#6
Registered User
I ran across this add of craigslist the other day.
https://dallas.craigslist.org/dal/pt...789120738.html
https://dallas.craigslist.org/dal/pt...789120738.html
The following 2 users liked this post by 98whitelightnin:
nothingbutdarts (01-12-2019),
Western Rammer (01-12-2019)
#7
Registered User
Thread Starter
Apparently the circuit boards fold around each other. The one outfit my mechanic is aware of that does that kind of work said "Not a chance".
Trending Topics
#8
Registered User
Join Date: Aug 2017
Location: New Orleans Louisiana
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Limp mode
Hey brotha I was wondering how yours started acting in limp mode ? No power all the time or randomly? I have an issue where she wont have any pedal until I get up over 1800 rpm or after the truck warms up . Appreciate it bud
Anyone have an '01 or '02 6sp HO truck in the pasture? I'm in need of an ECM
My truck has gone into limp mode and my mechanic has checked everything it thinks is wrong. (IAT sensor, MAP sensor and Bus.)
He's 99% certain it's the ECM. Unfortunately, that ECM is unique to those years and the HO 6 speed manual.
Thanks! Randy.
My truck has gone into limp mode and my mechanic has checked everything it thinks is wrong. (IAT sensor, MAP sensor and Bus.)
He's 99% certain it's the ECM. Unfortunately, that ECM is unique to those years and the HO 6 speed manual.
Thanks! Randy.
#9
Registered User
Thread Starter
In limp mode it's just gutless all the time. It seems like I'm only getting about 50% throttle maximum.
Hope that helps!
Thread
Thread Starter
Forum
Replies
Last Post
6spd05Dually
3rd Gen Engine and Drivetrain -> 2003-2007
5
03-12-2011 12:19 PM
jrussell
3rd Gen High Performance and Accessories (5.9L Only)
17
09-17-2007 06:38 PM
Ohio Joe
Performance and Accessories 2nd gen only
11
07-12-2004 12:13 PM