What Tools are needed for this?
Thread Starter
Registered User
Joined: Nov 2005
Posts: 617
Likes: 0
From: Tampa, Fl.
What Tools are needed for this?
I will be removing and replacing my stock Lift Pump. I need to make sure I have all the tools for this job as I would like to not be down for a day or two trying to locate the proper tools.
So, can anyone tell me what tools are needed for this repair? Sorry I have not gotten my Book yet.
So, can anyone tell me what tools are needed for this repair? Sorry I have not gotten my Book yet.
Registered User
Joined: Dec 2005
Posts: 159
Likes: 0
From: Conn
I just did my fourth one, If I remember correctly all I used was a 17mm 11mm and 10mm wrench and about ten minutes of time.
I did the vulcan relocation kit and highly recomend it! I can't get the pressure to go below 15psi! I put the pump right next to the tank.
I did the vulcan relocation kit and highly recomend it! I can't get the pressure to go below 15psi! I put the pump right next to the tank.
Thread
Thread Starter
Forum
Replies
Last Post
texasaggie2005
24 Valve Engine and Drivetrain
7
Aug 22, 2005 09:39 PM
eswartz
3rd Gen Engine and Drivetrain -> 2003-2007
8
Feb 23, 2005 01:19 AM