What size tires can i fit?
#4
Registered User
hey double,,if you go to the bigger coils,you`ll need to get an adjustable track arm also.if you don`t your front end will be pulled over about 1 1/4 inch.iv`e been looking and measuring everybodys trucks thats done this...
#5
I am running the same size tires with 4.5" of lift.
2 things - check the backspacing on the 589's and talk with whom ever is mounting the tires (or where you are buying the wheels and tires) to see if the set-up will work. Also, I run nerf bars, and rub slightly on them in a hard right hand turn. It's very manageable.
Matt
2 things - check the backspacing on the 589's and talk with whom ever is mounting the tires (or where you are buying the wheels and tires) to see if the set-up will work. Also, I run nerf bars, and rub slightly on them in a hard right hand turn. It's very manageable.
Matt
Thread
Thread Starter
Forum
Replies
Last Post
sho_shane
2nd Gen. Dodge Ram - No Drivetrain
7
03-03-2013 09:52 PM
reasonspj
3rd Gen Engine and Drivetrain -> 2003-2007
8
01-20-2010 07:36 PM
1320
General Diesel Discussion
8
05-29-2009 10:24 PM
bansh-eman
3rd Gen High Performance and Accessories (5.9L Only)
9
07-21-2008 10:13 PM
sakisaki400
3rd Generation Ram - Non Drivetrain - All Years
23
12-31-2006 10:17 PM