Vulcan rocks
Thread Starter
Registered User
Joined: Nov 2006
Posts: 319
Likes: 0
From: Camarillo
Vulcan rocks
I just got off the phone with Eric at Vulcan, and I couldn't be happier. I ended up just getting the DS1 instead of a full blown Liberty kit. He took the time to 'splain the whole unit to me and how to work on it, and save me ~$250 at the same time.
If you followed my previous threads you would know I had a fluctuating fuel pressure problem that ultimately led me to the module. The upper screen was torn, and a bit dirty. So somehow it was giving me some restrictions..(I hope this was the cause anyways!) So now, I will have an unabstructed shot straight to the lift pump. If I have problems after this install, then at least I will know all of my previous detective work was faulty! aaack!
Anyways, next day shipping was only an additional ~$12 or so, so tomorrow or Friday it will arrive.
Again, a shout out to Eric at Vulcan!, you da man!
If you followed my previous threads you would know I had a fluctuating fuel pressure problem that ultimately led me to the module. The upper screen was torn, and a bit dirty. So somehow it was giving me some restrictions..(I hope this was the cause anyways!) So now, I will have an unabstructed shot straight to the lift pump. If I have problems after this install, then at least I will know all of my previous detective work was faulty! aaack!
Anyways, next day shipping was only an additional ~$12 or so, so tomorrow or Friday it will arrive.
Again, a shout out to Eric at Vulcan!, you da man!
Chapter President
Joined: Apr 2007
Posts: 9,375
Likes: 7
From: misplaced Idahoan stuck in Albuquerque, Roughneckin on RIG 270
Thread
Thread Starter
Forum
Replies
Last Post
Monty
3rd Gen Engine and Drivetrain -> 2003-2007
0
Apr 6, 2003 11:02 AM
LinearX
3rd Generation Ram - Non Drivetrain - All Years
12
Dec 26, 2002 06:02 PM