Ok, I figured since I was new to the truck I would replace the LP just so i was safe, I looked for it and it appears there is just an AL block in its place. Then I noticed a sticker on the core support that says something like "The fuel system on this vehicle has been alter from its original form" or something along those lines. Does this mean I have an intake pump, and if so what upgrades should I make to protect my VP44

 

Look down along the driver side of the frame on the inside about even with the back of the cab. You will probably see a non stock lift pump of some sort. Try taking a picture and post it so we can help identify it. If it's not there you probably have an in-tank one installed by a dealer.

Also fill out your sig in user cp so we can help you more.

 

Updated Sig, but can't make it show up, maybe no enough post.

On topic

The fuel line comes from the tank, then goes to a rubber section off the frame rail in the engine bay to an aluminum housing that sits were the LP should be(from my understanding) then there is a banjo bolt on the other side of the Aluminum block that goes in to the FF assembly.

Tank looks some what new and has a fresh looking sticker on it. It the tank replaced as part of the intank pump.