Dodge Diesel - Diesel Truck Resource Forums

24 Valve Engine and Drivetrain Discuss the 24 Valve engine and drivetrain here. No non-drivetrain discussions please. NO HIGH PERFORMANCE DISCUSSION!

How much for gov pressure sensor?

Thread Tools
 
Search this Thread
 
Old Jul 17, 2006 | 02:21 PM
Share
  #1  
willd's Avatar
willd
Thread Starter
Registered User
 
Joined: Feb 2006
Posts: 36
Likes: 0
How much for gov pressure sensor?
Hey guys, for those of you who've had to replace your gov pressure sensor how much has it costed you and have you bought the part and installed it yourself or just had the dealership install it? Thanks guys!
Reply
0
Old Jul 17, 2006 | 02:27 PM
Share
  #2  
dctoner's Avatar
dctoner
Registered User
 
Joined: Feb 2004
Posts: 166
Likes: 0
From: TF, Idaho
not sure the cost but I pulled mine out to clean it and it took me 10 min to take out clean and re-install. Don't pay a dealer.
Reply
0
Old Jul 17, 2006 | 08:07 PM
Share
  #3  
bmoeller's Avatar
bmoeller
Registered User
 
Joined: Jun 2004
Posts: 850
Likes: 0
From: NW IL
I replaced the sensor and regulator when I still had my stock trans. They were ~$100/ea, at the Dodge dealer.

Installed them myself. Have to pull the pan and drop the valvebody to change them.
Reply
0
Old Jul 18, 2006 | 07:50 AM
Share
  #4  
Commatoze's Avatar
Commatoze
Registered User
 
Joined: Feb 2002
Posts: 1,424
Likes: 0
From: Sturbridge, Taxachusetts
I've had it done, and so has my son. I think it ran about 200 bucks. Mine was acting up again recently, but has cleared up.
Reply
0
Old Aug 1, 2006 | 03:14 PM
Share
  #5  
dieselho's Avatar
dieselho
Registered User
 
Joined: Apr 2004
Posts: 76
Likes: 0
From: Utah
Originally Posted by Commatoze
I've had it done, and so has my son. I think it ran about 200 bucks. Mine was acting up again recently, but has cleared up.
What are the symptoms?
Reply
0
Old Aug 1, 2006 | 05:21 PM
Share
  #6  
mgstroker95's Avatar
mgstroker95
Registered User
 
Joined: Jun 2006
Posts: 166
Likes: 0
From: The Woodlands
$75 bucks for the sensor. Easy to install. Most of the problems this causes is tranny shifting form gear to gear or out of first.
Reply
0
Old Aug 2, 2006 | 01:29 PM
Share
  #7  
willd's Avatar
willd
Thread Starter
Registered User
 
Joined: Feb 2006
Posts: 36
Likes: 0
Where can you get it at? I was told to check on ebay and didn't have any luck. Thanks, Will
Reply
0
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
new gov press solenoid and sensor... now Bad
zx14on2
3rd Gen Engine and Drivetrain -> 2003-2007
5
Jun 28, 2014 06:45 PM
MAP sensor or Oil Pressure sensor?
Redlinear
24 Valve Engine and Drivetrain
1
Feb 14, 2013 01:10 PM
gov pressure solenoid/ sensor
Tacomaman87
24 Valve Engine and Drivetrain
2
May 3, 2010 12:16 AM
Gov. Pres. Sensor, dang shift pattern!
the496rocket
24 Valve Engine and Drivetrain
6
Jul 21, 2006 07:58 AM
3000 gov spring vs 3000 gov spring kit
fishin fever
1st Gen. Ram - All Topics
11
Mar 13, 2006 06:46 PM
Back to Subforum
24 Valve Engine and Drivetrain
View Next Unread
new lift pump




Advanced Search

All times are GMT -5. The time now is 07:34 AM.