holding temp
#1
Registered User
Thread Starter
Join Date: May 2006
Location: Calgary, AB, Canada
Posts: 168
Likes: 0
Received 0 Likes
on
0 Posts
holding temp
re did my head gasket awhile ago and seem to have problems with the engine temp just falling off and not holding operating temp. any ideas on what it could be? it has a new thermostat from when i did it its a 195 what comes stock in them.
#2
Registered User
Join Date: Jan 2005
Location: eastern pa
Posts: 915
Likes: 0
Received 0 Likes
on
0 Posts
You mean by falling off the guage says its running cooler. Mabey your t stat is stuck open and not working right. You can take it out and put it in water on the stove and see if it will open. Mabey your temp sending unit is not functioning right either.
#3
Registered User
The stock T-stat is a 190* with an extra baffle to help it warm up faster in cooler temps. It's possible that your new thermostat was bad out of the box. If you pull it out, you can test it in some hot water or just try depressing the plunger by hand. When it's cool, you should have a hard time getting it to open by hand.
Thread
Thread Starter
Forum
Replies
Last Post
Bobcat698
3rd Gen Engine and Drivetrain -> 2003-2007
1
08-11-2005 10:10 AM
pcburnout
3rd Generation Ram - Non Drivetrain - All Years
2
04-23-2005 01:12 PM
GO 4LO
3rd Gen Engine and Drivetrain -> 2003-2007
20
09-08-2003 10:18 AM