24 Valve Engine and Drivetrain Discuss the 24 Valve engine and drivetrain here. No non-drivetrain discussions please. NO HIGH PERFORMANCE DISCUSSION!

Changing From Drw To Sw

Old Jun 29, 2006 | 07:50 AM
  #1  
hopak's Avatar
Thread Starter
Registered User
 
Joined: Jan 2005
Posts: 129
Likes: 0
From: Crestone Co
Changing From Drw To Sw

Is this possible: wife is complaining about the fenders sticking out. Also is there a crankcase breather can that should be serviced?
Reply
Old Jun 29, 2006 | 10:50 AM
  #2  
johnh's Avatar
Registered User
 
Joined: Nov 2002
Posts: 4,053
Likes: 29
From: lyman, utah
Originally Posted by hopak
Is this possible: wife is complaining about the fenders sticking out. Also is there a crankcase breather can that should be serviced?
do a search on my user name, i did mine but pictures are gone
Reply
Old Jun 29, 2006 | 11:59 AM
  #3  
1-2-3's Avatar
Just a plain ole guy
 
Joined: Jun 2006
Posts: 2,537
Likes: 11
From: Carlos, Texas
Tell her a good truck is the same as a good woman. The older it gets, the wider the back end grows. Then again, maybe you shouldn't mention this at all.
Reply
Old Jun 29, 2006 | 03:29 PM
  #4  
I SPEED's Avatar
Registered User
 
Joined: Jun 2004
Posts: 552
Likes: 1
From: Arundel, Me.
Originally Posted by hopak
Also is there a crankcase breather can that should be serviced?
There is...it's located at the front of the motor. Rubber hose that connects to a plastic bottle.

Most relocate it by extending the hose to somewhere along the frame.
Reply
Old Jun 29, 2006 | 03:35 PM
  #5  
derek840378's Avatar
Registered User
 
Joined: Oct 2005
Posts: 540
Likes: 0
From: Crosby, TEXAS
Originally Posted by hopak
Is this possible: wife is complaining about the fenders sticking out.
short list: front rotors, rear axle/rotors, new bed
i've never done it, but that seems to me what needs to be done.
Reply
Old Jun 29, 2006 | 06:30 PM
  #6  
Erska's Avatar
Registered User
 
Joined: Jun 2006
Posts: 596
Likes: 22
From: Kivialho,Finland
Originally Posted by derek840378
short list: front rotors, rear axle/rotors, new bed
i've never done it, but that seems to me what needs to be done.
Why new bed?

Just take dually fenders of and weld aftermarket "repair" kit fenders on. And a new paint.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
taterfarm
1st Gen. Ram - All Topics
10
Dec 11, 2012 08:22 PM
lawdog800
3rd Generation Ram - Non Drivetrain - All Years
19
Mar 31, 2011 09:26 AM
ADMOPARMAN
1st Gen. Ram - All Topics
4
Apr 21, 2009 11:40 AM
89dieselkong
2nd Gen. Dodge Ram - No Drivetrain
4
Apr 5, 2009 05:20 PM
jlipskoc
3rd Gen Engine and Drivetrain -> 2003-2007
9
Mar 7, 2009 08:00 PM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 09:14 PM.