What did you do to your Gen 1 today?
Administrator
Joined: Jul 2009
Posts: 5,311
Likes: 565
From: Phoenix AZ
Forgot to post this up....been a crazy busy few days off. Finished my last day of my night shift 4 days ago and was coming home around 4am....vehicle was following me fairly close and I had a weird vibe and thought it might be the police....well I was right as I came into town he flipped on his lights, so I pulled over. Cop walks up and says "Hey Brian how you doing!" Thought that was weird that he used my name like that, then he proceeds to let me know my insurance had expired 2 days ago....DOOOHHH!!! He was nice enough not to give me the $600 fine that this would have warranted, but would not let me drive it any further and I had to park it at the gas station I was right beside.
So after calling and waking up the wife we decided I would just sleep in the truck for 3-4 hours until she could swing by and get me on her way to work. When I woke up there was a cop sitting in the lot near me...my guess is they had been checking on me from time to time to make sure I was not some low life P.O.S and drive home anyway after the cops had left. Anyway wife drove me to get the insurance and all was well again.
Yesterday I got insurance for my trailer since my order of siding and supplies for the shop was supposed to be ready today. Hooked up the trailer last night to get ready for today and no and behold I had lights. Had brake and turn signals, but no running lights. Pulled it into the shop and climbed under neath and found that the main power for the trailer lights had corroded to blue goo in the connector under Ol' Patches. Found another connector in my spare parts and spliced that in and got everything working properly. Dragged the trailer around today but my order did not show up on the freight truck....so next week I guess.
So after calling and waking up the wife we decided I would just sleep in the truck for 3-4 hours until she could swing by and get me on her way to work. When I woke up there was a cop sitting in the lot near me...my guess is they had been checking on me from time to time to make sure I was not some low life P.O.S and drive home anyway after the cops had left. Anyway wife drove me to get the insurance and all was well again.
Yesterday I got insurance for my trailer since my order of siding and supplies for the shop was supposed to be ready today. Hooked up the trailer last night to get ready for today and no and behold I had lights. Had brake and turn signals, but no running lights. Pulled it into the shop and climbed under neath and found that the main power for the trailer lights had corroded to blue goo in the connector under Ol' Patches. Found another connector in my spare parts and spliced that in and got everything working properly. Dragged the trailer around today but my order did not show up on the freight truck....so next week I guess.
. In AZ your vehicle tags are automatically cancelled the minute that your insurance lapses and,being that all of the cops here have license plate readers in their cars, it doesn't take long to get caught. And yes, I know that was more than one thing 
...Mark.
Registered User
Joined: Nov 2016
Posts: 47
Likes: 13
From: PF, ID
I am needing someone to spell this out for me as I can't seem to get it straight in my head. I removed the bushings from the spring eyes and the shackle thinking I was just going to push new ones in. I bought six Moog 1.25"/.625 OD/ID bushings because I checked all three bolts and they are .625" threads. When I tried to install the bushings, they don't fit the shackle because it measures 1.125". They don't fit the spring because the spring eye measures 1.5". I went back and rechecked the specs on the board and all the websites offering parts and no one offers a bushings that fit the measurements I am getting. Now, I can get new shackles with pre-installed bushings from ATS, so that is one down, but they come with either .75 or .625 bolts and the spring eye bushings are listed as EITHER 1.5"/.75" OD/ID OR 1.25"/.625 OD/ID. No where am I finding 1.5/.625 like what seems to have come out of my truck. I have double and triple checked, the spring eyes are 1.5 and the bolts and holes in my truck are .625 which just doesn't jive with what seems to be the standard parts available. What am I missing here?
Registered User
Joined: Nov 2016
Posts: 258
Likes: 71
got my shocks the other day. Hoping to find a couple hours to get them installed along with the missing leaf nut.
Stupid question on the shocks do I mount them with the rod attached to the frame and the cylinder attached to the axle or does it not matter? Procomp E3000 series shocks
Stupid question on the shocks do I mount them with the rod attached to the frame and the cylinder attached to the axle or does it not matter? Procomp E3000 series shocks
Registered User
Joined: Dec 2008
Posts: 7,248
Likes: 2,874
From: vermont
got my shocks the other day. Hoping to find a couple hours to get them installed along with the missing leaf nut.
Stupid question on the shocks do I mount them with the rod attached to the frame and the cylinder attached to the axle or does it not matter? Procomp E3000 series shocks
Stupid question on the shocks do I mount them with the rod attached to the frame and the cylinder attached to the axle or does it not matter? Procomp E3000 series shocks
...Ben
Registered User
Joined: Nov 2016
Posts: 258
Likes: 71
Started installing my new shocks last night . Got the one rear one on no problem, went to drive the upper retaining bolt out of the opposite rear shock and it is stuck to the steel insert for the shock bushing. Doused it with Blaster, hoping that works its way in and loosens it up so I can finish this project.
That sucks about the paint Gunch, truck looks like it is coming along nice overall.
That sucks about the paint Gunch, truck looks like it is coming along nice overall.
Registered User
Joined: Nov 2010
Posts: 691
Likes: 102
From: Winterset, IA
Since I bought my house in Jan, I noticed a really nice 92 or 93 driving by my house every day. Didn't realized until the other day when I was cleaning up brush in the pasture that it is my neighbor's lol.
Registered User
Joined: Nov 2016
Posts: 258
Likes: 71
Got my rear shocks taken care of. Ended up cutting the frozen up factory hardware and replacedit with grade 8 bolts.
Then tore into the rear brakes to investigate the puddle under the drum. I found a messolution the axle seal I installed 1.5 years ago was disintegrated and axle fluid all over the place. Plus I have water intrusion somewhere in the axle housing. My shafthad droplets the whole length of it and pretty severe surface rust about 3/4 the way into the tube.
Going to just replace the wheel cylinders since I'm in there, should I do the shoes as well since they were contaminated with gear oil?
Then tore into the rear brakes to investigate the puddle under the drum. I found a messolution the axle seal I installed 1.5 years ago was disintegrated and axle fluid all over the place. Plus I have water intrusion somewhere in the axle housing. My shafthad droplets the whole length of it and pretty severe surface rust about 3/4 the way into the tube.
Going to just replace the wheel cylinders since I'm in there, should I do the shoes as well since they were contaminated with gear oil?
...Ben
Registered User
Joined: Mar 2010
Posts: 7,265
Likes: 1,346
From: Prince George, BC
Got my rear shocks taken care of. Ended up cutting the frozen up factory hardware and replacedit with grade 8 bolts.
Then tore into the rear brakes to investigate the puddle under the drum. I found a messolution the axle seal I installed 1.5 years ago was disintegrated and axle fluid all over the place. Plus I have water intrusion somewhere in the axle housing. My shafthad droplets the whole length of it and pretty severe surface rust about 3/4 the way into the tube.
Going to just replace the wheel cylinders since I'm in there, should I do the shoes as well since they were contaminated with gear oil?
Then tore into the rear brakes to investigate the puddle under the drum. I found a messolution the axle seal I installed 1.5 years ago was disintegrated and axle fluid all over the place. Plus I have water intrusion somewhere in the axle housing. My shafthad droplets the whole length of it and pretty severe surface rust about 3/4 the way into the tube.
Going to just replace the wheel cylinders since I'm in there, should I do the shoes as well since they were contaminated with gear oil?
Registered User
Joined: Nov 2016
Posts: 258
Likes: 71
Well at least now the rear brakes aren't near as intimidating as when I first did the job. Aldo having a 2 9/16 socket helps a ton.
Registered User
Joined: Nov 2010
Posts: 691
Likes: 102
From: Winterset, IA