Voltage regulator
04-27-2007, 11:58 AM
#1
Registered User
Thread Starter
Join Date: Jan 2007
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
Voltage regulator
I think my crank sensor is bad. I lose voltage from anywhere from 30 secs to an hour during this time my A/C does not work. I have changed numerous parts (PCM, ASD relay, cleaned up all chafed wires, CSS wire all looks good). If I add an external Voltage regultor should I disconnect or remove the crank sensor.
93 W250 4X4 195.000 miles Auto Thanks R..
93 W250 4X4 195.000 miles Auto Thanks R..
04-27-2007, 12:02 PM
#2
Registered User
Join Date: Jan 2004
Location: Placerville, Ca.
Posts: 136
Likes: 0
Received 0 Likes
on
0 Posts
I think my crank sensor is bad. I lose voltage from anywhere from 30 secs to an hour during this time my A/C does not work. I have changed numerous parts (PCM, ASD relay, cleaned up all chafed wires, CSS wire all looks good). If I add an external Voltage regultor should I disconnect or remove the crank sensor.
93 W250 4X4 195.000 miles Auto Thanks R..
93 W250 4X4 195.000 miles Auto Thanks R..
Is this Rollie Ron ?
Big Rich
Thread
Thread Starter
Forum
Replies
Last Post