Vacum pump seal
#1
Registered User
Thread Starter
Join Date: Oct 2006
Location: S.W. Missouri
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
Vacum pump seal
I'm having trouble with the seal between the vacum pump and power steering pump, have replaced it twice and today it went out again.
The seal is perfect it just blows out of the housing that you press it into, when you pull the power steering pump off the seal falls out with it. I've been a mechanic fot 40 years and haven't run into anything like this.
Any suggestions appreciated.
The seal is perfect it just blows out of the housing that you press it into, when you pull the power steering pump off the seal falls out with it. I've been a mechanic fot 40 years and haven't run into anything like this.
Any suggestions appreciated.
#3
Registered User
Thread Starter
Join Date: Oct 2006
Location: S.W. Missouri
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
It doesn't appear to be. The seal seems to press in very easily, the seal kit I got was FelPro, have one ordered with Cummins brand name to see if there is any difference.
Thread
Thread Starter
Forum
Replies
Last Post
jsimpson
2nd Gen. Dodge Ram - No Drivetrain
2
09-04-2003 09:39 PM