Just went down to the dealership and ordered all the molding my truck. They could get it all with the exception of the driver side bed under the fuel filler cap and the pass side rear bed side. If any one has any nos (or just some that are in really good shape) laying around or any suggestions Pm me. I just couldn't see reusing the old stuff that I stripped off on new paint. Thanks Jethrro

 

Try any local salvage yards the gassers use same molding as ctd do, about only idea i have, does dealer say its unavailible or what, i could check at our dealer.

 

I'm not sure if they have anything. http://www.cooltruckparts.com/

I would also check places like JC Whitney and stuff. I have seen boards in show rooms (Yipes Stripes, places like that) that would display all of their moldings that they offer. Maybe one would match up to your 1st gen, not sure.

 

I'm not sure which moulding that I have, but I took the moulding off of a bed that I'm going to use on my 92. it was lower on the bed than my moulding is,and it's a little wider with a chrome strip. if you are interested I'll post some pics of it and you can see if it is the same as yours.

 

timb
I am defiinitely interested. The molding on my truck has a chrome strip on the bottom. I PM ed you my Email address last night on the pump mods and schedule. Feel free to send the pics to me. I just hope the ones that I ordered from Lithia are the same as I had and as what you have. You wouldn't happen to know anything about the fender flares that came on some of these trucks, mine had them and I would like to put them back on and the dealership thinks there aftermarket. But many trucks have them. Thanks again Jethrro

 

My truck has the flares on it, and they are not after market. Are you just talking about the rear flares or the front to. I'll try and get some pics. tomorrow and send them to you.