Turbo Screwing
Thread Starter
Registered User
Joined: Dec 2004
Posts: 4,312
Likes: 1,063
From: Commerce, OK
Originally posted by jleonard
Yep...that's the stock set-up...mine looked like that sunday morning
It was fabbed from 3 inch intake tube from Road Race
Jay
Yep...that's the stock set-up...mine looked like that sunday morning
It was fabbed from 3 inch intake tube from Road Race
Jay
Thanks
Edwin
Registered User
Joined: Oct 2002
Posts: 241
Likes: 0
From: Torrington, Ct
Oh..sorry...that's the Freightliner intake horn I referred to in an earlier post.....
I got it from a fellow TDR member who did some boneyard shopping. He decided to go another way and offered it up.
I had to machine about 1/16 off the top and 3/16 off the mounting surface so the hood would close...It's really designed to be used without the grid heater block, but I managed to squeeze it all in.
I got it from a fellow TDR member who did some boneyard shopping. He decided to go another way and offered it up.
I had to machine about 1/16 off the top and 3/16 off the mounting surface so the hood would close...It's really designed to be used without the grid heater block, but I managed to squeeze it all in.
Thread
Thread Starter
Forum
Replies
Last Post
bridleman
Performance and Accessories 2nd gen only
12
Oct 4, 2008 10:23 PM
halerazor
12 Valve Engine and Drivetrain
3
Sep 18, 2004 08:50 PM