Anyone know what the NAPA part # is for the tamper-proof torx bit head, needed to remove the three torx screws on the ignition switch? The FSM lists TTXR15A2 as the Snap On part #. I just want to see if NAPA had the same tool for less $? TIA!

 

NAPA is where I got mine, but I don't remember the part number. I think I bought a couple of different bits that would fit my ratcheting screwdriver and one of them was the right one.

 

I got a whole set of them from AutoZOne for about $10. From about T10 to T35 or 40.

Daniel

 

Thanks, I'll have to go to NAPA and see what they have? I bought a swiss army style torx bit kit at Ace Hardware. It has the right size torx bit head, T15, however - it won't work due to the anti-theft pin in the middle of the torx head - on the ignition switch

 

They are known as security torx.

 

you could just knock the pin out of the middle with a smal punch and use the regular torx too.

 

Thanks all for the help! I ordered a set of security torx bits from NAPA, $21 and some change. I was going to use a punch on the security torx screws, as Woodrat suggested. I figured, as I am ham fisted, I would probably break the steering column