Short in Backup switch or wiring
Thread Starter
Registered User
Joined: Apr 2004
Posts: 1,115
Likes: 0
From: North of Calgary Alberta
Short in Backup switch or wiring
I noticed today I had a draw on Gauge today when I put the trany in reverse and only reverse.
I crawled under and made sure it was fully connected drivers side top of tranny .. yep it was. jumped back in and still a draw when I put it in reverse
so I unplugged it and draw is gone. So where do I start? the switch ?I have never had a getrag before so I have no idea about were the switch or actuator is on the tranny besides the plug on the side of the tranny . Is it on the passenger side top ? Is there some switch up on the shifter ? thank you
thank you
I crawled under and made sure it was fully connected drivers side top of tranny .. yep it was. jumped back in and still a draw when I put it in reverse
so I unplugged it and draw is gone. So where do I start? the switch ?I have never had a getrag before so I have no idea about were the switch or actuator is on the tranny besides the plug on the side of the tranny . Is it on the passenger side top ? Is there some switch up on the shifter ? thank you
thank you
Thread
Thread Starter
Forum
Replies
Last Post
Backwoods
3rd Generation Ram - Non Drivetrain - All Years
7
Oct 18, 2008 05:49 AM
Huntindad
3rd Gen High Performance and Accessories (5.9L Only)
3
Jul 9, 2006 09:34 AM
Herrin811
3rd Gen High Performance and Accessories (5.9L Only)
13
Oct 30, 2005 10:08 PM
