I placed my order today with desel auto power for a 63/65/14 turbo arp studs and diamond eye 4" exhaust. They are great people to deal with and hooked me up good.

 

Did you get a boxed 63/65 or is a build from one of the many turbo builders? Either way, it should be a good turbo for the small RPM range of the VE.

Are you gonna keep the stack or run the full DE kit?

 

The stacks are coming off. The turbo is a bd super B.

 

Isn't the super B a 62/65?

 

I meant killer B I said the wrong thing.

 

I've bought a lot from Diesel Auto Power. Had good luck with them and their customer service.

 

Yea I spoke to the owner jacob he was very nice and helpful.

 

Dallas is usually good with 1st gen stuff. He has one himself.

 

Yea he was not there when I called. But jacob was very knowledgeable also.

 

I have had the opportunity to speak with both of them before. They are very knowledgeable and helpful, I always try to buy through them. Their customer service is A+!

 

You might not have the same problem, but if they include bolts to hold the flange to the turbo elbow, USE them. I spent almost an hour fighting mine yesterday because my stock bolts were still in good shape, and the cheap in me said save the new bolts for later. After much cussing, I finally figured out the new ones were about a half inch longer than the stock ones.....