not reving
We are going to pull the top of the pump apart today and see what we find inside. When I did the spring, everything seemed ok but check again. Also, when putting the fuel pressure gauge on we found no fuel in the lines. Like all the fuel drained back. I can't find any leaks anywhere. The hard start problem started when we put the piston lift pump on. If it was a leak on the pressurized side, we would see fuel coming out when it was running. Not sure where it could be sucking air into the lines or leaking fuel out.
Thread
Thread Starter
Forum
Replies
Last Post
600 Megawatts
Performance and Accessories 2nd gen only
67
Jul 25, 2018 10:42 AM



