New to DTR from East TN
#1
Registered User
Thread Starter
Join Date: Aug 2014
Location: Clinton TN
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
New to DTR from East TN
Hello to everyone...from Clinton, TN. The specs of my current truck, 1991.5 D250 are listed below.
Have had two previous 7.3 PSD and 2 previous Cummins (both 1998's...3500's...one was 2wd DRW...the other was 4wd SRW). Picked up the D250 to use for a1950 Dodge 1/2 ton conversion, but changed my mind because I like the 91.5 so much. Just getting started going through it all, making the described changes as I go along. Not driving it much yet because I'm cleaning up the choices and changes made by PO. This is my first automatic Cummins...not as fun as the manuals, but it seems to be a good one so far...
I pull a flat bed during the week, so am often only on the forums on the weekends...usually working on the truck then, too.
Pics of it to come in the future.
_________________
1991.5 D250 Reg cab, shortened to 1/2 ton WB, 175K, 2" drop shackles and overload removed in rear w/van lower control arms in front, A518 w/capacitor "fix" for TPS, play pen, star wheel 1 1/4 turns, 4" open exhaust, KDP fix, air box modded with BHAF, B&M extra deep trans pan w/ Moroso gasket and tractor hydraulic oil, B&M diff cover, mostly happy owner...
Have had two previous 7.3 PSD and 2 previous Cummins (both 1998's...3500's...one was 2wd DRW...the other was 4wd SRW). Picked up the D250 to use for a1950 Dodge 1/2 ton conversion, but changed my mind because I like the 91.5 so much. Just getting started going through it all, making the described changes as I go along. Not driving it much yet because I'm cleaning up the choices and changes made by PO. This is my first automatic Cummins...not as fun as the manuals, but it seems to be a good one so far...
I pull a flat bed during the week, so am often only on the forums on the weekends...usually working on the truck then, too.
Pics of it to come in the future.
_________________
1991.5 D250 Reg cab, shortened to 1/2 ton WB, 175K, 2" drop shackles and overload removed in rear w/van lower control arms in front, A518 w/capacitor "fix" for TPS, play pen, star wheel 1 1/4 turns, 4" open exhaust, KDP fix, air box modded with BHAF, B&M extra deep trans pan w/ Moroso gasket and tractor hydraulic oil, B&M diff cover, mostly happy owner...
#2
Registered User
Welcome aboard!
#4
Registered User
welcome from the west.
Thread
Thread Starter
Forum
Replies
Last Post
rbrettctd
Natl. and Regional Chapters / Special Events
12
11-01-2007 04:11 PM