need help with radiator and some part numbers for mounts.
#1
Registered User
Thread Starter
need help with radiator and some part numbers for mounts.
Well I got the parts list i ordered today. i knew it was just pages ripped from an older Crash book, but thats all I thought i needed and i know how to read those things, But I was disappointed though. even though they break down many of the part numbers separate for the diesels the part numbers or even the exploded picture doesn't show the mounting tabs or rubber cushions for the radiator. I need those part numbers since i have given up on finding used ones.
I also came up with the following Dimensions for the Cummins ,diesel only ,radiator as, 25 3/4 X 21 X 2 1/4 can anyone verify this ?
By the way if anyone needs factory part numbers for ANYTHING- BUT- the mounts and cushions I'll see if i can help. crossy
I also came up with the following Dimensions for the Cummins ,diesel only ,radiator as, 25 3/4 X 21 X 2 1/4 can anyone verify this ?
By the way if anyone needs factory part numbers for ANYTHING- BUT- the mounts and cushions I'll see if i can help. crossy
#2
Registered User
Join Date: Mar 2005
Location: SW Pennsylvania - Greene County
Posts: 1,167
Likes: 0
Received 2 Likes
on
2 Posts
I believe the "mounts" are not serviced as a unit. The "cushions" or as the dealership calls them "insulator" is still available for the 1991 model year. They are listed as individual parts for the upper & lower. Check out part numbers 3495417 and 4432056. I just had a list printed at my dealership for all of the cushions for the cab and rad support cushions but I didn't mark where each went as I intended on ordering all of them. They are not cheap.
Thread
Thread Starter
Forum
Replies
Last Post
roxxx
1st Gen. Ram - All Topics
9
09-21-2009 08:52 AM
TxDiesel007
12 Valve Engine and Drivetrain
6
07-02-2007 06:16 PM