1st Gen. Ram - All Topics Discussion for all Dodge Rams prior to 1994. This includes engine, drivetrain and non-drivetrain discussions. Anything prior to 1994 should go in here.

to much for truck????

Old Sep 30, 2007 | 08:35 PM
  #1  
rydDiesel174's Avatar
Thread Starter
Registered User
 
Joined: Jun 2007
Posts: 77
Likes: 0
From: warminster, pa
to much for truck????

found this 93 first gen with 115000 on it le with pw, pl, ac, auto, ext cab, dually, 4x4 for 10,500. is it worth that much its the truck i want so is worth it to me but is that a lil high????

Click to enlarge this photo.

Click to enlarge this photo.

Click to enlarge this photo.
Reply
Old Sep 30, 2007 | 08:36 PM
  #2  
rydDiesel174's Avatar
Thread Starter
Registered User
 
Joined: Jun 2007
Posts: 77
Likes: 0
From: warminster, pa
http://images.autotrader.com/images/..._A.240x180.jpg
Reply
Old Sep 30, 2007 | 08:38 PM
  #3  
rydDiesel174's Avatar
Thread Starter
Registered User
 
Joined: Jun 2007
Posts: 77
Likes: 0
From: warminster, pa
http://images.autotrader.com/images/..._A.562x421.jpg

http://images.autotrader.com/images/..._A.562x421.jpg

http://images.autotrader.com/images/..._A.562x421.jpg

sorry bout so many post i am not good with the uploading of pics
Reply
Old Sep 30, 2007 | 08:41 PM
  #4  
MikeThomas's Avatar
Registered User
 
Joined: Jan 2007
Posts: 919
Likes: 6
From: Seatac WA
She sure is slick looking! If she drives as good as she looks, then probably.
Reply
Old Sep 30, 2007 | 08:46 PM
  #5  
rydDiesel174's Avatar
Thread Starter
Registered User
 
Joined: Jun 2007
Posts: 77
Likes: 0
From: warminster, pa
well there was a new booster and master cylinder put in and there is air in the system so thats kinda easy fix.
Reply
Old Sep 30, 2007 | 08:54 PM
  #6  
u.s mma's Avatar
Registered User
 
Joined: May 2007
Posts: 717
Likes: 0
From: Fairbanks, Alaska
Are rigs rust free out there? It looks clean, out here that truck would be about that price.
Reply
Old Oct 1, 2007 | 07:52 AM
  #7  
MoparMarv's Avatar
Registered User
20 Year Member
 
Joined: Dec 2005
Posts: 783
Likes: 1
From: Oak Lawn, IL
For a spotless truck you described thats in the ballpark. Given that it has the plow I would be curious as to how the truck was used. Look at the under side well. for over 10k the frame rails should be almost clean and there should be nothing other than minor surface rust on anything. check out the heel spot on the driver side floor pan. also around the rear window. Driveshafts, axles, T/C etc for leaks and wear. Anything wrong should be bringing that price down given the high starting price. Thats my opinion. It sure does look nice.
Reply
Old Oct 1, 2007 | 04:27 PM
  #8  
wannadiesel's Avatar
Adminstrator-ess
20 Year Member
 
Joined: Mar 2003
Posts: 22,594
Likes: 19
From: New Holland, PA
I think it's priced too high. If you are going to pay anything close to that much, the truck needs to be absolutely perfect.

To add to Marv's tips, look real close under that visor. Could be hiding some real nastiness. Any rust bubbles up there knock the price way down.
Reply
Old Oct 1, 2007 | 05:14 PM
  #9  
powerrammaster's Avatar
Registered User
 
Joined: Jul 2007
Posts: 717
Likes: 1
From: NORTH JERSEY
Did you look at it up close??? I did..it has a terrible paint job, they diidnt even paint under the rockers, the cab mounts and spring perches are junk, the plow is junk and I would question the mileage. It is wayyyyy over priced,and it was beat, had a ball in bed, it has been slapped together.It looks good in photos but in person someone is pulling a fast one on ya.I was gonna buy it too but its bafd up close!
Reply
Old Oct 1, 2007 | 06:30 PM
  #10  
MoparMarv's Avatar
Registered User
20 Year Member
 
Joined: Dec 2005
Posts: 783
Likes: 1
From: Oak Lawn, IL
I thought it looked like a repaint in the one photo.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Lu
24 Valve Engine and Drivetrain
8
Jun 24, 2003 08:57 AM
MR. GADGET
3rd Gen Engine and Drivetrain -> 2003-2007
5
Apr 24, 2003 02:51 PM
GaCamper
12 Valve Engine and Drivetrain
7
Feb 4, 2003 12:30 AM
Wes C
24 Valve Engine and Drivetrain
9
Dec 24, 2002 12:28 AM
csaverline
Towing and Hauling / RV
8
Dec 8, 2002 07:18 PM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 03:01 PM.