Injectors
#1
Registered User
Thread Starter
Injectors
About 6 or 7 years ago I swapped out my stock non IC injectors for a set of 190's. I know the stockers are about 4x.013, does anyone know the hole size of the 190's? Been searching and am unable to locate this info.
Thanks
Ed
Thanks
Ed
#2
Registered User
5X0.009. I ran across this in someones Bosch injector catalog and put in my notes for future reference.
#3
Registered User
Thread Starter
Thanks, been kicking around going back to stockers looks like they supply a little more fuel.
My original ones had about 220k on them and need at least new nozzles, do I go that route? I cobbled together rig to check pop pressures. Now I see Standard Motor Products makes new ones. Anyone familiar with their quality? Am i better off sending mine to a rebuilder? Any recommendations? I know, lots of questions lol.
Thanks
Ed
My original ones had about 220k on them and need at least new nozzles, do I go that route? I cobbled together rig to check pop pressures. Now I see Standard Motor Products makes new ones. Anyone familiar with their quality? Am i better off sending mine to a rebuilder? Any recommendations? I know, lots of questions lol.
Thanks
Ed
#4
Registered User
Thanks, been kicking around going back to stockers looks like they supply a little more fuel.
My original ones had about 220k on them and need at least new nozzles, do I go that route? I cobbled together rig to check pop pressures. Now I see Standard Motor Products makes new ones. Anyone familiar with their quality? Am i better off sending mine to a rebuilder? Any recommendations? I know, lots of questions lol.
Thanks
Ed
My original ones had about 220k on them and need at least new nozzles, do I go that route? I cobbled together rig to check pop pressures. Now I see Standard Motor Products makes new ones. Anyone familiar with their quality? Am i better off sending mine to a rebuilder? Any recommendations? I know, lots of questions lol.
Thanks
Ed
Thread
Thread Starter
Forum
Replies
Last Post
darrenG
Performance and Accessories 2nd gen only
8
06-21-2005 10:24 PM