Hey fellas, Im almost ready to get started putting the twins on my truck. I was thinkin I should probly lookinto getting some bigger injectors ove the PODs I got know, since Ill have the extra air to help burn some more fuel. Im looking to get close to the 500hp range, so any thoughts or ideas would be greatly apprciated. Thanks

 

With twins, 6X.018's would be the way to go.

 

yea i would go with 6X.018's or 6X.016's

 

My son is running PODs in his 91.5. he didn't care much for them until he did the twins, now he really likes them . the twins give them enough air to run cleaner and he just rolled the dyno at 407/900
real good # for a truck that tows some hefty 30k+- loads

 

were would b the best place to get the 6x.016 or.018 at?

 

I got mine from New Era http://www.neweradiesel.com/
I love 'em, but there are other places to get them. I know Schied sells them also, but they are much more expensive. I'm sure some others will chime in.

 

scheid diesel or buddha power are good but expensive

 

What turbos did he use for the twin setup? Does he have an auxiliary fuel pump to keep the fuel flowin? I also have a 91.5 and I want to upgrade the injectors and the turbo. Waiting for the 366 spring and the Denny T fuel pin to get here.

Carlos

 

HX35w on top of a HX55 stock lift pump but soon to have 2nd gen piston pump