Helped needed with VE pump- messed up 366
#1
Registered User
Thread Starter
Helped needed with VE pump- messed up 366
I'm having some issue with my installation.
I have lost my marks on the manual shut of lever. I replaced the o-ring with the wrong size out of the kit, it leaked so I elected to try on the truck to install the correct o-ring.
But it moved... lots. No leak, but it doesn't seem to work either which is bad. Is there something in the Bosch literature on how it is suppose to be installed?? pdf or some info would be helpful.
I think when the cover was off- the internal part was nearly parallel with the case.
Sincerely,
Michael
I have lost my marks on the manual shut of lever. I replaced the o-ring with the wrong size out of the kit, it leaked so I elected to try on the truck to install the correct o-ring.
But it moved... lots. No leak, but it doesn't seem to work either which is bad. Is there something in the Bosch literature on how it is suppose to be installed?? pdf or some info would be helpful.
I think when the cover was off- the internal part was nearly parallel with the case.
Sincerely,
Michael
The following users liked this post:
NJTman (03-07-2017)
Thread
Thread Starter
Forum
Replies
Last Post
sadlerb_98
24 Valve Engine and Drivetrain
24
01-26-2006 04:30 PM
glowball
3rd Gen High Performance and Accessories (5.9L Only)
11
03-01-2005 11:58 PM
dwhite
3rd Gen Engine and Drivetrain -> 2003-2007
12
10-26-2004 12:57 PM
Scotty
3rd Gen Engine and Drivetrain -> 2003-2007
4
09-29-2004 10:49 AM