good or bad idea....?
good or bad idea....?
i have a set of PODs, the smokey fuel pin and a 3200 rpm spring, i have a stock transmission.... good or bad idea? truck has 290000 kms..... trans is VERY strong. let me know what your opinion is. check out my truck in my profile pictures!
There is allot of people running the stock trans with tons of mods.
Do us a favor and fill out your sig in user cp so we know exactly what you got, year, model, trans, ect.
I have a 3spd auto with 350k miles and has never been worked on and I don't exactly take it easy on it. It seems like the trans will hold up but you might want to put a shift kit in it if it's auto and also think about at TQ down the road.
Ryan
Do us a favor and fill out your sig in user cp so we know exactly what you got, year, model, trans, ect.
I have a 3spd auto with 350k miles and has never been worked on and I don't exactly take it easy on it. It seems like the trans will hold up but you might want to put a shift kit in it if it's auto and also think about at TQ down the road.
Ryan
Nice truck.
With the POD's, pin and gov spring you have the potential to make some good power.
If the torque converter is stock it will suck up a good portion of your new power though, and create some heat wile doing it.
I would put a trans temp guage on it if you don't already have one and start researching torque convs and performance trans parts.
With the POD's, pin and gov spring you have the potential to make some good power.
If the torque converter is stock it will suck up a good portion of your new power though, and create some heat wile doing it.
I would put a trans temp guage on it if you don't already have one and start researching torque convs and performance trans parts.
Thread
Thread Starter
Forum
Replies
Last Post
bakdoor
Performance and Accessories 2nd gen only
9
Mar 23, 2009 10:09 AM
torq_crowe
Towing and Hauling / RV
22
Sep 12, 2008 06:59 PM
wap
3rd Gen High Performance and Accessories (5.9L Only)
1
Sep 11, 2006 12:44 PM
jrussell
1st Gen. Ram - All Topics
9
Jun 14, 2006 11:04 PM



