1st Gen. Ram - All Topics Discussion for all Dodge Rams prior to 1994. This includes engine, drivetrain and non-drivetrain discussions. Anything prior to 1994 should go in here.

GloShift gauges...

Thread Tools
 
Search this Thread
 
Old Jul 16, 2009 | 10:48 AM
  #1  
Cowboy_Customs's Avatar
Thread Starter
Registered User
 
Joined: Mar 2006
Posts: 1,176
Likes: 0
From: Port Crane (Binghamton) NY
GloShift gauges...

I have heard of them but never looked them up so I just did.......

Are they always this cheap???? Or is really a sale? That aint bad at all!

Anyone running them, how do you like them? They seem very easy to hook up, and look pretty darn nice to boot. And from what I saw, maybe its only the Elite series, but a single power wire for multiple gauges in parallel? VERY cool.
Reply
Old Jul 16, 2009 | 10:56 AM
  #2  
Crossy's son's Avatar
Registered User
 
Joined: Jan 2008
Posts: 7,547
Likes: 2
From: Quinton, New Jersey (middle of nowhere)
I Smokems runs glowshift gauges and he loves them.

I think his egt gauge goes up to 2000.
Reply
Old Jul 16, 2009 | 11:22 AM
  #3  
Cowboy_Customs's Avatar
Thread Starter
Registered User
 
Joined: Mar 2006
Posts: 1,176
Likes: 0
From: Port Crane (Binghamton) NY
Yea the EGT is good for like 22 or 2400 degrees! Thing that sux is most of them start at 400* though.
Reply
Old Jul 16, 2009 | 11:46 AM
  #4  
89smurf's Avatar
Registered User
 
Joined: Jun 2009
Posts: 26
Likes: 0
Originally Posted by Cowboy_Customs
Yea the EGT is good for like 22 or 2400 degrees! Thing that sux is most of them start at 400* though.
That alone would make me not buy them. Pretty uselss when you're trying to get down to 300* after a long or hard run.
Reply
Old Jul 16, 2009 | 03:57 PM
  #5  
jcmoyer2004's Avatar
Registered User
 
Joined: Sep 2007
Posts: 527
Likes: 0
From: Katy, Tx
i had a set of them and i loved them, especially for the price..you can't bet it, and my pyro was the typical style that went up to 1600 from 100 i believe. i'd buy them again in a heartbeat, really easy to install and quick shipping from them. just my .02 though
Reply
Old Jul 16, 2009 | 05:59 PM
  #6  
Cowboy_Customs's Avatar
Thread Starter
Registered User
 
Joined: Mar 2006
Posts: 1,176
Likes: 0
From: Port Crane (Binghamton) NY
Not all of them are 400* starting point, some of them though.

I totaly agree, they are WAY more affordable to a comparible Autometer or Isspro. I like the Tinted 7 series personaly. But are they ALWAYS that low priced, or is it really a sale?

I picked out a set that included boost to 60 PSI, Pyro, and fuel pressure to 100 PSI, which was the "tinted 7 series" with A-pillar for a 2nd gen and it was only 211 bucks! AND they are ALL electronic senders, minus the pyro.

A good fuel pressure gauge with the electric isolator, is well over 150 dollars by itself from Autometer.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
DC199512V87
Performance and Accessories 2nd gen only
12
Mar 14, 2012 06:42 PM
Kman9090
3rd Gen High Performance and Accessories (5.9L Only)
29
Dec 6, 2007 06:43 PM
coontz0473
3rd Gen High Performance and Accessories (5.9L Only)
17
Sep 22, 2006 03:52 PM
Duckman1993
1st Gen. Ram - All Topics
12
Sep 12, 2006 07:50 PM
AggiePhil
Performance and Accessories 2nd gen only
2
Jan 30, 2005 01:15 PM




All times are GMT -5. The time now is 07:39 PM.