Here are some exploded parts brake downs, and touque specs for our trannys, Hope everyone can get some use out of them.


Drain Plug- 35Ft. Lbs

Front Bearing Retainer Bolt(Besure to use Blue loctite)- 22Ft. Lbs

Idler Gear Shaft Bolt- 40Ft. Lbs

Oil Fill Plug- 35Ft. Lbs

Rear Bearing Retainer Bolt(Besure to use Blue loctite)- 22Ft. Lbs

Shift Cover Bolt(Besure to use Blue loctite)- 22Ft. Lbs

Yoke Nut- 280Ft. Lbs

 

This figure is showing you how to measure Bearing Race Protrusion

 

This figure is showing you how to Measur Bearing Shim Bores

 

Ill try and get Re-assembly procedure posted on here tonight or tomarrow

 

got anything on rail housing or detents? 1st and 3rd gear pop out under decel unless i hold them in. im thinkin a messed up detent.

Thanks!

 

Well cant figure out how to get my txt document to a pdf, so if ne one needs the reassembly procedure I can e-mail it to you

 

See this page for a rebuild manual in .pdf.

GETRAG G360 5 Speed