Dodge Diesel - Diesel Truck Resource Forums

1st Gen. Ram - All Topics Discussion for all Dodge Rams prior to 1994. This includes engine, drivetrain and non-drivetrain discussions. Anything prior to 1994 should go in here.

getrag master&slave on nv4500?

Thread Tools
 
Search this Thread
 
Old Nov 1, 2009 | 11:22 AM
Share
  #1  
NO_SPRK's Avatar
NO_SPRK
Thread Starter
Registered User
 
Joined: Jun 2008
Posts: 673
Likes: 1
From: Santa Rosa, Ca
getrag master&slave on nv4500?
On my way to pick up a 29spline 205. Want to buy the whole pedal and hydro setup. Anyone know if the getrag slave will bolt up to a nv4500 bell housing?
Reply
0
Old Nov 1, 2009 | 11:52 AM
Share
  #2  
Kansascrewcab76's Avatar
Kansascrewcab76
Registered User
20 Year Member
 
Joined: Jun 2005
Posts: 409
Likes: 19
From: kansas
IIRC, the setup would work, but the lines aren't long enough due to where the slave cylinders mount on each bellhousing. the difference is like 8-10" and requires a tight 90 deg. bend.
Reply
0
Old Nov 1, 2009 | 10:32 PM
Share
  #3  
deerslayer1979's Avatar
deerslayer1979
Registered User
 
Joined: May 2008
Posts: 266
Likes: 0
I used a stock OEM setup on my 92. It worked just fine for me, so dont know why it wouldnt work for you.
DS79
Reply
0
Old Nov 1, 2009 | 10:38 PM
Share
  #4  
NO_SPRK's Avatar
NO_SPRK
Thread Starter
Registered User
 
Joined: Jun 2008
Posts: 673
Likes: 1
From: Santa Rosa, Ca
Thanks. ended up buying a getrag so no longer have to worry
Reply
0
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Nv4500 cross post need a bit of help on master and slave replacement part numbers
roxxx
1st Gen. Ram - All Topics
9
Sep 21, 2009 08:52 AM
New Slave & Master cylinders; still hard to shift. NEXT!
jethroish
24 Valve Engine and Drivetrain
11
Aug 24, 2009 12:16 PM
clutch master cylinder-slave- does this sound right??
banks twinram
Performance and Accessories 2nd gen only
7
Feb 28, 2005 02:43 PM
Clutch Slave and Master cylinder
Heeler00
HELP!
1
Feb 18, 2004 01:52 PM
Back to Subforum
1st Gen. Ram - All Topics
View Next Unread
Just Bought my first 6BT Cummins. New to the Forum TOO!




Advanced Search

All times are GMT -5. The time now is 06:08 AM.