fuel pin washer
12-07-2010, 09:15 PM
#1
Unless it's untaxed, then it's red.
Thread Starter
Join Date: Aug 2009
Location: Damascus MD
Posts: 589
Likes: 0
Received 0 Likes
on
0 Posts
fuel pin washer
a while back i took out the little nylon washer where the fuel pin meets the rubber at the AFC. Now I'm sitting here thinking if i want more fuel, i need to get that washer back in! doesn't that basically pre-stage the pin a bit lower just like the smoke screw would do? and at WOT the pin goes deeper with the washer than without it?
smoke is not a problem, or egt, just looking for all the free HP i can squeeze out.
smoke is not a problem, or egt, just looking for all the free HP i can squeeze out.
12-07-2010, 09:23 PM
#2
Registered User
Join Date: Feb 2010
Location: A 5th dimension, beyond that which is known to man.
Posts: 1,044
Likes: 0
Received 1 Like
on
1 Post
the nylon washer does nothing besides keeping the fuel pin from going down. the only performance reason to use it would be if the fuel pin was going so far down that you were going past the deepest part of the ramp.
Thread
Thread Starter
Forum
Replies
Last Post
Dean Snow
1st Gen. Ram - All Topics
14
10-22-2007 10:41 PM