could this work on a 1st. gen?
#1
could this work on a 1st. gen?
No experience with the twins....could this be made to work on my 93? what would have to change other than the 2nd gen. manifold?
http://cgi.ebay.com/ebaymotors/ws/eB...5916&viewitem=
http://cgi.ebay.com/ebaymotors/ws/eB...5916&viewitem=
#2
1st Generation Admin
That exhaust down-pipe won't work with your truck as it'll not pass the fire-wall.
You'll need a down-pipe that shoots straight down and back such as this . .
As far as the exhaust manifold, you may be able to simply use yours (not sure about the 2nd gen).
You'll need a down-pipe that shoots straight down and back such as this . .
As far as the exhaust manifold, you may be able to simply use yours (not sure about the 2nd gen).
#3
David, I saw your twin turbo project and wondered from your experience if this is a wothwhile undertaking for a daily driver? I am just an hp junkie that will be towing 11k once or twice a week 30 miles round trip. the truck is great now but kind of feels flat after the initial 40/50 mph burst. I just want more but am not sure the best direction to head in?
#4
Registered User
Thread
Thread Starter
Forum
Replies
Last Post
92GhostRyder
1st Gen. Ram - All Topics
27
09-16-2018 12:02 PM
BRUISER
1st Gen. Ram - All Topics
11
02-02-2015 11:25 AM
Firstgenfanatic
1st Gen. Ram - All Topics
15
11-14-2007 12:03 AM