How do I remove this? And does it add power

 

/www.dieseltruckresource.com/dev/showthread.php?t=132418&highlight=AFC+LEVER+REMOVA L

^Above is a thread that talks about afc removal. Yes, it adds more power and smoke! If you do an advanced search for your topic You'll find more info than you have time for in 1stgen forum

 

Ok thank you I will read that link. I tried joining 1stgen.org but i havent got my email

 

What if i took the fuel pin out?

 

That will usually cause a massive fuel leak.

 

o ok guess im taking the lever out

 

How much horse power and torque do you guys think i would have i put a 3200 spring in, and the took the lever out, with the power screw all the way in(removed the ring thing), smoke screw 3 turns, ground fuel pin, bhaf, and starwheel half turn????????

 

It depends on a lot of other things. Start trying things and see how you like the results.

 

ok how bout timing

 

Look in the sticky for the timing bump. 1/8 from the cyllinder head is good. Brought our fuel mileage up and gives more throtte response.

 

Ok thank you i will check that out

 

If you have the AFC foot out, the smoke screw or ground pin isn't doing anything.

 

Ok With is out wil it build more power than i have

 

Yes, removing the AFC lever makes more power. It will be a smoky mess with POD's though.

 

k i prob wnt have pods for a while