1st Gen. Ram - All Topics Discussion for all Dodge Rams prior to 1994. This includes engine, drivetrain and non-drivetrain discussions. Anything prior to 1994 should go in here.

93 wiring Diagram

Old Dec 14, 2006 | 11:59 AM
  #1  
Chrisreyn's Avatar
Thread Starter
DTR's Night Watchman & Poet Laureate
 
Joined: Jun 2004
Posts: 2,156
Likes: 1
From: Lyndon KS
93 wiring Diagram

I know there is a diagram for the 91.5 on here, but there are differences between the 91 and 93 model years in the wiring looms.
Does anyone have a wiring schematic for a 93??????
Reply
Old Dec 14, 2006 | 01:44 PM
  #2  
swampthang's Avatar
Banned
 
Joined: Jul 2006
Posts: 81
Likes: 0
From: halltown mo
Originally Posted by Chrisreyn
I know there is a diagram for the 91.5 on here, but there are differences between the 91 and 93 model years in the wiring looms.
Does anyone have a wiring schematic for a 93??????


i think i might have one in my fsm i will have to did it out any specific part ya looking for ?


Jason
Reply
Old Dec 14, 2006 | 03:15 PM
  #3  
wannadiesel's Avatar
Adminstrator-ess
20 Year Member
 
Joined: Mar 2003
Posts: 22,594
Likes: 19
From: New Holland, PA
The '91.5 trucks are different than everything else when it comes to engine/drivetrain related wiring.

What in particular were you looking for?
Reply
Old Dec 15, 2006 | 05:54 AM
  #4  
Chrisreyn's Avatar
Thread Starter
DTR's Night Watchman & Poet Laureate
 
Joined: Jun 2004
Posts: 2,156
Likes: 1
From: Lyndon KS
I am having some ground problems I think.. effecting the fuel guage, tail lights and such, i'd like to find a copy of the full schematic similar to the one that is on here for the 91.5's.

Replaced both RR lamp sockets and brake, tail/turn and back-up lamps worked fine. Installed new trailer plugs, checked everything while hooked up to the trailer, everything worked great. Unhooked the trailer and pulled into teh garage and lost the left rear turn signal, and have a weak current to teh back up lights when running lights are on. back up lights are coming on with brake lights.
At some point there was alot of splicing done into the harness for the RR lamps sockets and I have traced teh wiring back to the first plug, replaceing the bad sections of wire. I am certain that I probably have a short to teh ground some where, but cant find the ground points for the lighting harness.

Also trying to locate the ground points under the hood. There is the main battery cable ground to the block, the battery to core support ground, and it seems there should be a ground from teh firewall to the block, but I cant find it....
Reply
Old Dec 17, 2006 | 10:13 AM
  #5  
Chrisreyn's Avatar
Thread Starter
DTR's Night Watchman & Poet Laureate
 
Joined: Jun 2004
Posts: 2,156
Likes: 1
From: Lyndon KS
Anybody help me on this?????????

stillhaevnt been able to find the problem.
I bought one of the Hoppe trailer plug kits that plug into the wiring harness, nad if I unhook it, everythings wroks fine, so I amsure the problem is in my trailer plug harness, but cant find it.....getting frustrated
Reply
Old Dec 17, 2006 | 03:22 PM
  #6  
Chrisreyn's Avatar
Thread Starter
DTR's Night Watchman & Poet Laureate
 
Joined: Jun 2004
Posts: 2,156
Likes: 1
From: Lyndon KS
OK got it figured I think.. and just if anyone else ever needs it...RR lamp wiring:
the black/red stripe= parking lamp( dimmer of the two filaments)
black/yellow stripe=turn and stop
violet=reverse lights
solid black is a common ground for both sockets.......
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
SEmerson
2nd Gen. Dodge Ram - No Drivetrain
5
Aug 10, 2004 10:15 AM
Sidewinder
2nd Gen. Dodge Ram - No Drivetrain
5
Jul 14, 2004 05:42 PM
Johnny
Towing and Hauling / RV
5
Jun 16, 2004 08:33 AM
HydraulicGuy
HELP!
16
Feb 28, 2004 04:19 PM
Stevenc
Towing and Hauling / RV
15
Nov 21, 2003 09:05 AM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 10:45 PM.