70’s truck aftermarket AC/heat
12-11-2017, 06:25 PM
#16
Registered User
Keep ear protectors in the cab like the Deuce and a Half guys do!!
In all seriousness: I plan to thoroughly dynamat my cab and doors if I ever get to the point of putting the interior back in.
12-12-2017, 04:42 AM
#17
I'm pulling the dash/hvac box and installing some SR car on the firewall and floor, as well as the SR thermal barrier on the firewall in addition to a set of the reproduction pressboard fiberglass matting. Heater core is leaking and need to install the evaporator out of the 1993 so A/C can work down the line. (running the full 1993 A/c setup.
The following users liked this post:
mknittle (12-12-2017)
12-17-2017, 12:13 PM
#18
Registered User
I’m spraying bed liner under the cab and firewall and putting roadkill everywhere inside it’s time consuming but should make a big difference
12-24-2017, 07:30 PM
#19
Registered User
Thread Starter
Well, Christmas got moved to my in law’s, so I won’t be able to do the install until New Years. I’ll start a new thread on this install as soon as I get it in and get the pictures in order. Merry Christmas everyone!
The following 3 users liked this post by 73CrewCab:
Thread
Thread Starter
Forum
Replies
Last Post
tswcoaltrain
2nd Gen. Dodge Ram - No Drivetrain
7
11-12-2019 09:11 PM
Common
12 Valve Engine and Drivetrain
14
11-09-2006 08:43 PM
I PASS GAS
Performance and Accessories 2nd gen only
7
03-16-2006 07:59 AM