pull the throttle plate off, turn the shaft, put throttle plate back on.

 

which way. til the spring is tight.

 

twist it towards the front till it gets tight then tighten the allen screw

 

K i got it now i just need to get that blasted spring back in place. But she smokes sooooo much its great.

 

good to hear you got it running finally!!

 

Told ya....just "nervous hard" is all....a good rule(s) of thumb....look closely at the parts relationship with other componenets, once you've got them fairly well committed to memory just go ahead and make the mods.....keep in mind that short of loosing parts by dropping them you can pretty much "undo" most any adjustment you make without much difficulty.

pb.....