1st Gen. Ram - All Topics Discussion for all Dodge Rams prior to 1994. This includes engine, drivetrain and non-drivetrain discussions. Anything prior to 1994 should go in here.

2 WD front lift

Old Sep 10, 2009 | 03:12 PM
  #1  
1st gen wontabe's Avatar
Thread Starter
Registered User
15 Year Member
 
Joined: Oct 2007
Posts: 147
Likes: 0
From: savannah ga
2 WD front lift

I saw on e-bay a set of coil spring spacers for the 2 WD.I've seen discusion on this site about this ,but can't find it now.would someone with more computer skills than I get this item to show up below so I can get some opinions.e-bay search item # 120467764493. If I get new springs to get my ride hieght back how long before the new springs settle?Since my old springs are already settled I figured I could raise it now and it'll stay there.Thanks,Bobby
Reply
Old Sep 10, 2009 | 05:43 PM
  #2  
AUGIE DOG's Avatar
Registered User
 
Joined: Oct 2006
Posts: 472
Likes: 0
From: APEX,NC
You might want to think about replacing the coils. If you want to raise the front end I know some of the fellas on here have used the severe duty coils to achieve this. Also you need to check the rubber spacer cup that sits on top of the spring. These will cause sag in the front end. Check in the sticky for coil and front suspension part #s. Hope that helps. I know others will respond to your post. Good Luck!
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Txwelder
HELP!
450
Nov 26, 2025 01:53 AM
doomgaze
Performance and Accessories 2nd gen only
1
Apr 13, 2006 01:21 PM
0425004x4
3rd Gen High Performance and Accessories (5.9L Only)
16
Jan 23, 2006 06:43 PM
Txwelder
12 Valve Engine and Drivetrain
2
May 19, 2005 06:10 PM
lucey
3rd Gen High Performance and Accessories (5.9L Only)
8
Apr 21, 2005 09:53 PM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 01:33 PM.