Dodge Diesel - Diesel Truck Resource Forums

1st Gen. Ram - All Topics Discussion for all Dodge Rams prior to 1994. This includes engine, drivetrain and non-drivetrain discussions. Anything prior to 1994 should go in here.

1.55mm of timing?

Thread Tools
 
Search this Thread
 
Old Sep 5, 2009 | 11:20 AM
Share
  #1  
Mike T.'s Avatar
Mike T.
Thread Starter
Registered User
 
Joined: Apr 2006
Posts: 386
Likes: 0
From: Arizona
1.55mm of timing?
I don't have a timing tool and was wondering at what point on the pump timing mark would this equal to approximatley. Another words would it equal 1/16, 1/8 bump etc.

Thanks
Reply
0
Old Sep 5, 2009 | 12:11 PM
Share
  #2  
Bouts's Avatar
Bouts
Registered User
 
Joined: Sep 2007
Posts: 58
Likes: 0
From: Winnipeg MB
1.55mm is equal to .06 inches, I don't know where that fits into the fractions unfortunately
Reply
0
Old Sep 5, 2009 | 12:25 PM
Share
  #3  
ppiggppenn's Avatar
ppiggppenn
Registered User
 
Joined: Feb 2007
Posts: 703
Likes: 1
From: MyTrailer, Canada
Originally Posted by Mike T.
I don't have a timing tool and was wondering at what point on the pump timing mark would this equal to approximatley. Another words would it equal 1/16, 1/8 bump etc.

Thanks
I have the Snap-On tool that converts injector line pressure surges to timing light flashes, so when the video on "bumping the timing" is up I'll make a chart to convert the fractions to degrees BTDC.
Reply
0
Old Sep 5, 2009 | 12:37 PM
Share
  #4  
Mike T.'s Avatar
Mike T.
Thread Starter
Registered User
 
Joined: Apr 2006
Posts: 386
Likes: 0
From: Arizona
Thanks guys.
Reply
0
Old Sep 6, 2009 | 08:10 PM
Share
  #5  
crewcabxlt's Avatar
crewcabxlt
Registered User
 
Joined: Nov 2007
Posts: 571
Likes: 0
From: northern utah
ppiggppenn- that woud be very useful ino, please post any findings, i have thought of doing the same but dont have a pulse adapter!
Reply
0
Old Sep 6, 2009 | 08:56 PM
Share
  #6  
93flatbed's Avatar
93flatbed
Registered User
 
Joined: Apr 2008
Posts: 1,778
Likes: 23
I've been looking through the snap on catalog and can't find the tool. I will buy it if I can find it? Any one got a tool # for it? Or I guess I will wait til Friday and ask my dealer.
Reply
0
Old Sep 6, 2009 | 08:59 PM
Share
  #7  
93flatbed's Avatar
93flatbed
Registered User
 
Joined: Apr 2008
Posts: 1,778
Likes: 23
Oh and I now see Mike T. is here in AZ. If you would like you can barrow my dail guage to "tune" your truck. I got the one that screws in the back of your pump with a dail indacater on the end of it.
Justin
Reply
0

Trending Topics

Old Sep 7, 2009 | 08:57 AM
Share
  #8  
Mike T.'s Avatar
Mike T.
Thread Starter
Registered User
 
Joined: Apr 2006
Posts: 386
Likes: 0
From: Arizona
Thanks Justin, I've never used one of those dail indacaters before, don't know where it goes. I'm down in Sierra Vista about 20 mi. from the border.
Reply
0
Old Sep 7, 2009 | 10:05 AM
Share
  #9  
93flatbed's Avatar
93flatbed
Registered User
 
Joined: Apr 2008
Posts: 1,778
Likes: 23
Oh, well If you want to make the trip then ok. I thought that you were one of the guys out in Tempe. Do you plan on making it up to the dyno day they are planning on? I could bring it then.
Justin
Reply
0
Old Sep 7, 2009 | 01:58 PM
Share
  #10  
Mike T.'s Avatar
Mike T.
Thread Starter
Registered User
 
Joined: Apr 2006
Posts: 386
Likes: 0
From: Arizona
I'm not going to be able to make it. Maybe I can get up there some other time. Thanks again.
Reply
0
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
timing pointer -- timing tape??
GR40RCapri
12 Valve Engine and Drivetrain
5
Jul 24, 2006 11:47 PM
KDP, Plate, & timing bump this wknd...what tools for timing?
GR40RCapri
Performance and Accessories 2nd gen only
5
Jun 25, 2006 12:53 AM
Local Reno, Nevada shop to do timing and best timing for my setup??
West Coast
12 Valve Engine and Drivetrain
3
Mar 26, 2006 11:09 AM
timing, rokktec, timing boxes, how do they relate?
RonP
3rd Gen High Performance and Accessories (5.9L Only)
12
Feb 24, 2006 02:12 PM
Engine Timing?or Pump timing?
redhornet
12 Valve Engine and Drivetrain
4
May 28, 2004 06:06 PM
Back to Subforum
1st Gen. Ram - All Topics
View Next Unread
poly sway bar bushings




Advanced Search

All times are GMT -5. The time now is 06:43 PM.