All of my vac. line is gone along with the connectors on my 97 Dodge 2500 12v 2wd 5 speed (Fire). My question is: What size is the adaptor that connects the 1/8 in Vac line to the Vac. Pump. It's Memorial Day Weekend and I have had no luck with any of the auto parts stores. As an aside If I knew the size of the fitting on the pump I could just run that size hose to the brake booster and then branch off from there. What do you think? I'm not the brightest bulb in the lamp and I value your opinions and advice. Semper Fi, well done to all of our fallen Vets and their families..


AIN'T GOTTA BE EASY, JUST GOTTA BE DONE

 

Do you have a tape-measure?

Sorry to hear about the fire - that's a scary scenario. I hope it didn't do a lot of damage to wiring, suspension, brake system, etc.

 

Thanks for the reply. The parts guy at NAPA found me one. Thanks anyway.

 

Glad you found what you needed.

For measuring things like you needed, I have a steel version of this pocket caliper - it's been most handy over the years.

 

Thanks, just picked one up at Harbor Freight, the parts guy made the same suggestion.