NV-4500 rebuild
NV-4500 rebuild
Can someone tell me roughly how much it would cost in parts for a complete rebuild. One of my gears came apart and I was just curious how much it would cost.
A good site for parts..
Quad 4x4
or
Standard Transmission and gear
I found it cheaper for me to buy a rebuilt unit instead of doing it myself. I got it from a local vendor (Pats Driveline/Gear Centre) with upgraded main shaft and 5th gear with cast iron tail section support for $1700 after core return on the original. I don't have the special nut tools or presses for some of the parts.
Quad 4x4
or
Standard Transmission and gear
I found it cheaper for me to buy a rebuilt unit instead of doing it myself. I got it from a local vendor (Pats Driveline/Gear Centre) with upgraded main shaft and 5th gear with cast iron tail section support for $1700 after core return on the original. I don't have the special nut tools or presses for some of the parts.
i just rebuild mine and it costed me 1300 in parts, but i had to put in a new mainshaft, countershaft, third gear, input shaft, fifth gear fork, and rebuild kit, it was pretty time consuming, but it was simple if you have a good memory, good luck!
509-276-2998 this is the guy i buy my stuff from he is really cheap and great parts. cost me around 190 for rebuild kit or right around there. have had to rebuild mine 3 times now on account that i do competitive sled pulling.
I've read of a few places that sell 4500s that are already rebuilt for around $1200.
Problem is shipping especially since they want the core returned.
Midwest Transmissions Zumbrota MN 888-824-2012
or the a fore mentioned Standard Transmission sell these.
Problem is shipping especially since they want the core returned.
Midwest Transmissions Zumbrota MN 888-824-2012
or the a fore mentioned Standard Transmission sell these.
Thread
Thread Starter
Forum
Replies
Last Post
Superduty12v
Performance and Accessories 2nd gen only
22
Oct 11, 2002 07:42 PM



