How do I advance timing to 16*?
Registered User
Joined: Feb 2002
Posts: 1,839
Likes: 0
From: Sharpsburg KY
Re:How do I advance timing to 16*?
I have been to Mittchels place a few times. Being how big his place is I thought he would charge a arm and a leg.<br>Mark who did yours. does he live up twards Ohio?<br>Thanks<br>DM01
Registered User
Joined: Dec 2002
Posts: 706
Likes: 0
From: Bethpage, Tn
Re:How do I advance timing to 16*?
[quote author=dodgeman01 link=board=16;threadid=9716;start=15#94027 date=1043043604]<br>I have been to Mittchels place a few times. Being how big his place is I thought he would charge a arm and a leg.<br>Mark who did yours. does he live up twards Ohio?<br>Thanks<br>DM01<br>[/quote]<br><br>Nope Knoxville TN 
You never know man call and ask how much they'd charge! They are good decent folks! Lorretta is a blast to talk to at the pulls! (dave'd too busy!)
You never know man call and ask how much they'd charge! They are good decent folks! Lorretta is a blast to talk to at the pulls! (dave'd too busy!)
Registered User
Joined: Jun 2002
Posts: 15
Likes: 0
From: Boise, ID
Re:How do I advance timing to 16*?
As THINGFISH said, come to the Boise valley in February. Oilburner (from NWBombers.com - THINGFISH's favorite site - sorry Muddy, had to do that) and I can do it. We have the Snap-on kit.<br><br>-Jay
- sorry Muddy, had to do that) and I can do it. We have the Snap-on kit.<br><br>-Jay
Registered User
Joined: Jan 2003
Posts: 45
Likes: 0
From: Boise, ID
Re:How do I advance timing to 16*?
Bring it on down. Keep an eye out on the events forum for our Boise area Ho-Down. Probabley kill some KDP's also. Hopefully mine being one of them. Keep in touch, Oily
Registered User
Joined: Oct 2002
Posts: 54
Likes: 0
From: Meridian, ID
Re:How do I advance timing to 16*?
I live in Meridian, ID (30 miles from Marsing) and would love to get involved. Would love to ahve the timing done to 15.5 and to get the KDP fix. I Just got my 3k gov springs on Monday and am waiting to put them in. My truck comes back from the tranny place on Friday with new pieces parts. Let me know how or what I can do to get involved. Also, I am a capable person and do all my own work so getting in and getting dirty is not a problem.<br><br>Don (glad for the chance to work with knowledgable people)
Registered User
Joined: Jun 2002
Posts: 15
Likes: 0
From: Boise, ID
Re:How do I advance timing to 16*?
turbospl311,
As Muddy said, if you can hold off until March 1, we'll plan on doing your KDP and timing then. Delaying doing the KDP is a little risky, but without the jig, you'd have to pull the case cover (done that) and tab it. If you decide to do that, you should plan to get a gasket and seal kit, about $54 at Cummins.
If you really need the timing (or KDP) done before, Lon (rotorhead) and I can prolly do that. We are only a mile apart on the west side of spud-town, so we're close.
-Jay
As Muddy said, if you can hold off until March 1, we'll plan on doing your KDP and timing then. Delaying doing the KDP is a little risky, but without the jig, you'd have to pull the case cover (done that) and tab it. If you decide to do that, you should plan to get a gasket and seal kit, about $54 at Cummins.
If you really need the timing (or KDP) done before, Lon (rotorhead) and I can prolly do that. We are only a mile apart on the west side of spud-town, so we're close.
-Jay
Thread
Thread Starter
Forum
Replies
Last Post
LanceD
Performance and Accessories 2nd gen only
15
Jan 12, 2004 05:23 PM
