95 dodge w/ wait to start light on continuously
Thread Starter
Registered User
Joined: Mar 2009
Posts: 2
Likes: 0
95 dodge w/ wait to start light on continuously
The "Wait to Start" light fails to extinguish after starting the engine. I have changed the intake temp sensor and the heater control solenoides. Help please
Rich
Rich
Registered User
Joined: Dec 2003
Posts: 14,672
Likes: 9
From: Montana
First time for your problem before, sounds like the PCM if the grids are turning off but the light stays on.
A new PCM is pricey, personally I'd just pull the light bulb and use the drop/rise of the voltmeter for my light.
Don't think this will help but give it a try> http://dodgeram.org/tech/dsl/trouble...niford_htr.htm
A new PCM is pricey, personally I'd just pull the light bulb and use the drop/rise of the voltmeter for my light.
Don't think this will help but give it a try> http://dodgeram.org/tech/dsl/trouble...niford_htr.htm
Registered User
Joined: Apr 2008
Posts: 74
Likes: 0
First time for your problem before, sounds like the PCM if the grids are turning off but the light stays on.
A new PCM is pricey, personally I'd just pull the light bulb and use the drop/rise of the voltmeter for my light.
Don't think this will help but give it a try> http://dodgeram.org/tech/dsl/trouble...niford_htr.htm
A new PCM is pricey, personally I'd just pull the light bulb and use the drop/rise of the voltmeter for my light.
Don't think this will help but give it a try> http://dodgeram.org/tech/dsl/trouble...niford_htr.htm
WOW!! very nice link thanks!! Have had a few problems now I can fix!!!
Thread
Thread Starter
Forum
Replies
Last Post
2006BLKMegacab
3rd Generation Ram - Non Drivetrain - All Years
8
Nov 19, 2011 10:12 AM
bfarrell
24 Valve Engine and Drivetrain
4
Nov 30, 2005 03:23 PM