1992 Bumper for Wench
07-23-2014, 04:34 PM
#1
1992 Bumper for Wench
As posted in another thread, I am considering replacing the existing bumper because the bumper pad is beginning to delaminate a bit. My question is, does anyone have an opinion as to the type of bumper I could source?
Ultimately I would like to install a wench on the front, so it would need to be able to accommodate that, yet not be too bulky.
Any suggestions would be most appreciated.
Ultimately I would like to install a wench on the front, so it would need to be able to accommodate that, yet not be too bulky.
Any suggestions would be most appreciated.
07-23-2014, 04:53 PM
#3
Registered User
I think you mean Winch.
this is from Webster's dictionary
1wench
noun \ˈwench\
: a young woman; especially : a young woman who is a servant
Which might not be a bad idea either.
P.S. I am not trying to be a jerk, I misspell tons of words. But this one always makes me chuckle.
I once saw an ad in the classifieds that said two 8000 pound wenches.
here is a link from a request I made a while back.https://www.dieseltruckresource.com/...s-t318463.html
this is from Webster's dictionary
1wench
noun \ˈwench\
: a young woman; especially : a young woman who is a servant
Which might not be a bad idea either.
P.S. I am not trying to be a jerk, I misspell tons of words. But this one always makes me chuckle.
I once saw an ad in the classifieds that said two 8000 pound wenches.
here is a link from a request I made a while back.https://www.dieseltruckresource.com/...s-t318463.html
07-23-2014, 04:58 PM
#4
I think you mean Winch.
this is from Webster's dictionary
1wench
noun \ˈwench\
: a young woman; especially : a young woman who is a servant
Which might not be a bad idea either.
P.S. I am not trying to be a jerk, I misspell tons of words. But this one always makes me chuckle.
I once saw am ad in the classifieds that said two 8000 pound wenches.
this is from Webster's dictionary
1wench
noun \ˈwench\
: a young woman; especially : a young woman who is a servant
Which might not be a bad idea either.
P.S. I am not trying to be a jerk, I misspell tons of words. But this one always makes me chuckle.
I once saw am ad in the classifieds that said two 8000 pound wenches.
LOL- yes of course, grammar and context is everything. Even on a diesel forum
wInch..... is what I mean. Either that or just a bit heavier bumper. Yet I like the idea of a ........wInch for various and sundry utilitarian purposes.
PS Just one 8000 pound wEnch would be a lot to handle. Talk about Whole Lotta Rosie...
07-23-2014, 05:19 PM
#5
Registered User
LOL- yes of course, grammar and context is everything. Even on a diesel forum
wInch..... is what I mean. Either that or just a bit heavier bumper. Yet I like the idea of a ........wInch for various and sundry utilitarian purposes.
PS Just one 8000 pound wEnch would be a lot to handle. Talk about Whole Lotta Rosie...
wInch..... is what I mean. Either that or just a bit heavier bumper. Yet I like the idea of a ........wInch for various and sundry utilitarian purposes.
PS Just one 8000 pound wEnch would be a lot to handle. Talk about Whole Lotta Rosie...
Glad you took that in the sprit of fun as I meant it.But 2 X 8000 =16000#
07-23-2014, 05:24 PM
#6
Registered User
I a also thinking about bumpers. There are some nice aftermarket ones out there but the price is too much for me. I will just have to make some I guess.
07-23-2014, 06:34 PM
#7
Here's mine. 6" c channel face with 4" c channel mounts that slide into the frame. 2" angle finishing off the sides. Some 2" angle bracing that ties the outer ends back to the 4" mounts. Simple, but effective. Don't know how dressed up you want it. I went for total utilitarian function over form. 
Trending Topics
07-23-2014, 06:42 PM
#8
Registered User
Here's mine. 6" c channel face with 4" c channel mounts that slide into the frame. 2" angle finishing off the sides. Some 2" angle bracing that ties the outer ends back to the 4" mounts. Simple, but effective. Don't know how dressed up you want it. I went for total utilitarian function over form.
Yes yours is utilitarian and it gives me ideas.
now that I hijacked the thread.
07-23-2014, 07:06 PM
#9
Registered User
What…where are all the wenches?
07-23-2014, 07:22 PM
#10
Registered User
07-23-2014, 07:38 PM
#12
Um, yeah this went off the rails quickly...
Mounting a wench on your bumper might be a bit of a special challenge.....
So now back on topic- Any good after market ideas or sources?
Great fabricated bumper flyboy. Very creative and utilitarian. Probably enough room to mount...never mind
07-23-2014, 07:38 PM
#13
Registered User
07-23-2014, 07:42 PM
#14
Registered User
Sorry to de-rail.
On a serious note...
Reunel out of Yuba City Ca was making some really nice bumpers for the Dodge several years back.
I have had one on my 2nd gen for about 14 years now, it has put several deer in the freezer rather than total my truck over the years.
They where not cheap, but they where an well made unit.
On a serious note...
Reunel out of Yuba City Ca was making some really nice bumpers for the Dodge several years back.
I have had one on my 2nd gen for about 14 years now, it has put several deer in the freezer rather than total my truck over the years.
They where not cheap, but they where an well made unit.
07-23-2014, 07:43 PM
#15
Registered User
Join Date: Dec 2008
Posts: 1,751
Likes: 0
Received 0 Likes
on
0 Posts
If I can ever get my house issue settled and sold I'm looking to buy a new place and have a shop built. When that day comes I plan to start offering some 1st gen bumpers at a more reasonable price. I know what mine cost to build and guarantee its stronger than anything offered now. It would easily accommodate a winch or even two wEnches.