Quality new set of tools at a great low price.go to www.leveragewrench.com

 

Interesting product. Any info on if these will provide the leverage to snap the craftsman gear wrenches? Most of my wrenches flex already when I lean on them.

 

Gear Wrenches are not meant to break anything loose or tighten.The leveragewrench can only be used on box or open end wrenches.

 

When I need extra leverage, I just hook another box end over the open end of the wrench I have on the nut. You double your length and break 'em loose most everytime!

 

RTillery, That is what my partners and I used to do.The problem with that is it could slip off or you can damage the sensor of the wrench.We found that we get even better leverage using the leveragewrench with no chance of damaging your tools or chance of an injury.

 

We get the same feedback from all of our customers that bought a set of leveragewrenches for $44.95 and that is great set of tools and how can you sell them so cheap?

 

Money back guarantee for all forum members.I am very confident that you will love the quality of these tools once you purchase them.These sets were selling well for $210 off of some Snap-On Trucks 3 years ago here in NY.

 

Neat stuff.

I have been building and using this exact type of wrench extender for about 20 years now. They work great for those places where a breaker bar, or impact gun are just not practical.

I have seen various other types of wrench extenders, I have simply stuck with this type, as they work well for me.

Good luck with them

 

Depending on the wrench size I use the handles from my varipous floor jacks..
Small 3000 lb aluminum jack handle slips over most small-medium wrenches.
large 5 ton floor jack handle talkes care of the larger wrenches..
Thes also work well on various ratchet handles to gain the leverage..

Works for me...

These do look handy and may look into giving them a try... not sure about the $$

 

Only $44.95 for this quality set of tools!!!

 

This is a great deal for just $44.95

 

Last chance to get the Leveragewrench set for $44.95!! As of tomorrow we will be going back to our original selling price of $64.95

 

Due to an overwhelming response our company has decided to extend our current sale price of $44.95 for our quality set of Leveragewrenches until Sunday night 8/12/12 As of Monday 8/13/12 we will be going back to our original price of $64.95 You have only 3 days left to get a Set of Leveragewrenches at that great low price.

 

A bargain at $64.95 considering Snap-on, Matco and Mac are selling them off their trucks for$85-$95