Smarty settings for drag racing
#1
Registered User
Thread Starter
Join Date: May 2008
Location: Longmont, CO
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
Smarty settings for drag racing
Hey guys so I am going drag racing tom and am wondering what might be a good setting for the smarty. I have standard revo software and a mostly stock pickup(see sig). Right now I have it on level 9 with all other settings at default. Thanks in advance
#3
Registered User
Thread Starter
Join Date: May 2008
Location: Longmont, CO
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
no slipping yet. I usually run it on SW 5 with no problems. I just bumped it up today to test it. The clutch is my main concern and I dont want to ruin it just for a little fun. That being said I plan to upgrade my clutch soon and want to see what my pickup will do.
#5
Registered User
If you don't want to ruin your clutch stay on sw5.
If you're planning on a new clutch anyways I would try sw7, for some reason all the sw7 programs have seemed to be stronger that the sw9 programs. But you will more than likely break her loose.
If you're planning on a new clutch anyways I would try sw7, for some reason all the sw7 programs have seemed to be stronger that the sw9 programs. But you will more than likely break her loose.
Trending Topics
#8
Registered User
#9
Registered User
It still $200 less than normal. $200 is alot now days considering how quickly it leaves our pockets.
Too bad you don't have the nv5600, it doesn't have to have the upgraded hydraulics, its recommended , but I know of plenty ppl who don't have it done...
Too bad you don't have the nv5600, it doesn't have to have the upgraded hydraulics, its recommended , but I know of plenty ppl who don't have it done...
#12
Registered User
Join Date: Mar 2008
Location: Spokane Valley / Thompson Falls, MT.
Posts: 791
Likes: 0
Received 0 Likes
on
0 Posts
The reason I am asking, is I just unloaded TNT, and loaded the Revo. Sw9 seems fair off the bottom, then kind of falls off on top. 411 seemed stronger, but just like the betas you lose all the adjust options.
I am pretty much tuning all over again, I just added an Arson III, believing I could finally run the TNT software..... not happening, still bucking and popping. I will try sw7 this weekend when I get back home... sure wish Mads would get a tune for our 03/04 trucks that would perfrom like TNT on the 04.5+ trucks.
#13
Registered User
Thread Starter
Join Date: May 2008
Location: Longmont, CO
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
Okay so my best run was a 15.492 @ 91.55mph which I'm pretty happy with especially considering it was about 5200' above sea level. I had absolutely no clutch slippage but my biggest problem was my launch. My first run I slipped the tires and had to feather the pedal until it hooked. Second run was my best with a slight amount of tire slippage but it kept the turbo spooled well. The third run I bogged it and lost 1/2 sec. on my 60' time. BTW I ran it in 2wd all day.
#14
Registered User
Are you speaking about the Standard Revo tune, sw7 being stronger than sw9? Has anyone actually proved this on a dyno? Or is this just seat of the pants guesswork?
The reason I am asking, is I just unloaded TNT, and loaded the Revo. Sw9 seems fair off the bottom, then kind of falls off on top. 411 seemed stronger, but just like the betas you lose all the adjust options.
I am pretty much tuning all over again, I just added an Arson III, believing I could finally run the TNT software..... not happening, still bucking and popping. I will try sw7 this weekend when I get back home... sure wish Mads would get a tune for our 03/04 trucks that would perfrom like TNT on the 04.5+ trucks.
The reason I am asking, is I just unloaded TNT, and loaded the Revo. Sw9 seems fair off the bottom, then kind of falls off on top. 411 seemed stronger, but just like the betas you lose all the adjust options.
I am pretty much tuning all over again, I just added an Arson III, believing I could finally run the TNT software..... not happening, still bucking and popping. I will try sw7 this weekend when I get back home... sure wish Mads would get a tune for our 03/04 trucks that would perfrom like TNT on the 04.5+ trucks.
Thread
Thread Starter
Forum
Replies
Last Post
nvr-enuf
3rd Gen High Performance and Accessories (5.9L Only)
2
04-23-2011 12:43 AM
dog rocket
3rd Generation Ram - Non Drivetrain - All Years
10
10-16-2007 01:05 PM
D.Wiggs
3rd Gen High Performance and Accessories (5.9L Only)
31
08-30-2007 02:48 PM
Mike D
Performance and Accessories 2nd gen only
67
11-01-2006 10:37 PM