Dyno Day
#1
Registered User
Thread Starter
Join Date: Feb 2006
Location: Vandalia, Il
Posts: 508
Likes: 0
Received 0 Likes
on
0 Posts
Dyno Day
Well the Dyno Day we had was a good success. It was the first time we had had any thing like this in this area. I ended up pleasantly surprised with my numbers. They will be below but, another member here blew past his old numbers and he can tell it when he gets off work today. I will get some video up of the trucks later but here is my dyno sheet. I still need alot more air but it was a start.
#4
Registered User
Thread Starter
Join Date: Feb 2006
Location: Vandalia, Il
Posts: 508
Likes: 0
Received 0 Likes
on
0 Posts
Thanks I ended up with the third highest hp numbers no where close to the top two trucks though. One Ford did surpise me though with 472hp 1009 tq lots of dmax's none over 400 though.
#6
Registered User
Join Date: Oct 2006
Location: Irving il.
Posts: 118
Likes: 0
Received 0 Likes
on
0 Posts
Well our first dyno day was great. We ran 25 trucks on the dyno. Had a band in the evening and a good time was had by all. I am not positive on a count of people but i would say over a 100? I will try to get everyones numbers listed in the next week. I have to get the sheet. I forgot to get a copy. On another note i had a very good day. I want to first thank john from FLOOR IT DIESL PERFORMANCE for coming over with the dyno and spending the day. For those who have not met john you need to put it on your list of things to do. John worked his magic on a pump for me and we were able to get the truck to run a 686.5hp and 1486TQ
Trending Topics
#9
Registered User
Join Date: Oct 2006
Location: Irving il.
Posts: 118
Likes: 0
Received 0 Likes
on
0 Posts
They are some of the very first edm's. I am hoping to replace them latter in the year with some flux! They have done well for me but i have reached a point were i feel i can move on.
#10
Registered User
Join Date: Apr 2007
Location: Hillsboro, IL
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Congrats again, Jump. I would also like to thank John and I would like to thank you for helping Aaron's truck lay down 571 hp.
I plan on retyping the list of names and numbers as soon as I can. I will keep you posted...
I plan on retyping the list of names and numbers as soon as I can. I will keep you posted...
#11
Registered User
Thread Starter
Join Date: Feb 2006
Location: Vandalia, Il
Posts: 508
Likes: 0
Received 0 Likes
on
0 Posts
I checked my edge records yesterday once I got back in the truck and found that I may have been able to have bigger or flatter numbers but it had defueld 100% at some point. MY new trubo helped but not enough.
#12
Registered User
Join Date: Oct 2006
Location: Irving il.
Posts: 118
Likes: 0
Received 0 Likes
on
0 Posts
Well blink you know there is no need for a thanks you are both friends. I have also been doing some thinking. I know but there was no one around to stop me! I think with a few changes we may be able to get him into the 600. The only down fall is after a certain point you don't make the big jump in numbers any more. You just start tuning everthing and making it all work together better. I still have a few trick in the bag.
#13
Registered User
Join Date: Oct 2006
Location: Irving il.
Posts: 118
Likes: 0
Received 0 Likes
on
0 Posts
Hey blink if you need any help with those numbers let me know. I have been working some more odd jobs so maybe that cam will come before summer is over. I would like to get some time to get all the video lined out too.
Thread
Thread Starter
Forum
Replies
Last Post
pwerwagn
Natl. and Regional Chapters / Special Events
2
02-28-2007 03:18 AM
502502
Natl. and Regional Chapters / Special Events
23
11-23-2005 06:16 PM